AMX APEX Destiny 6100 Especificaciones descargar pdf (Pagina 64)

Speak Alert Memory: To hear all activations stored in LTM enter a full function code followed by the 8 key.

The LTM will be spoken in order starting from the most recent activation. If there are

no activations stored, the system will sound three beeps. LTM and EML can be

simultaneously cleared by entering 9898 in program mode. LTM will store 8

activations. If there are more than 8 activations, the oldest will drop off leaving room

for the most recent.

Bypass Mode: To bypass individual zones, enter a valid full function code followed by the 9 digit. The

system will speak "BYPASSED MODE, ENTER ZONE NUMBER." Press a two-digit zone

number (leading zero if necessary). The current bypass state of the zone is spoken.

Pressing A toggles the bypass status (confirmed in speech). Pressing H exits bypass

mode. To unbypass all bypassed zones, enter 00 as the two-digit zone number.

The following are system operation notes relative to bypass:

1) Bypassed zones will display open/close if programmed to do so.

2) Bypassed zones that show as open are ignored for purposes of forced arming.

3) No monitor speech or beep or alarm activation will occur for a bypassed zone.

4) Only zones that exist in the system can be bypassed. The system will issue 3-beeps

if an invalid zone number is entered.

5) If the system is programmed for split arming, only zones in the partition(s)

controlled

by the user code you use to enter bypass mode can be bypassed.

6) Fire zones and disabled zones cannot be bypassed.

7) As a programmable option, any bypassed zone will automatically unbypass the next

time the system is disarmed. If this option is not programmed, bypassed zones will

remain bypassed until they are manually unbypassed.

Bypassing is not permitted in a UL installation.

User Test Mode: See "Central Station Features."

Extended Monitor

Extended Monitor This option determines the amount of time an extended monitor activation will remain

keypad display time: system status.

Time between beeps: When using the extended monitor mode as an enunciator, you may wish to have

audible indication as well as visual. The extended monitor speech or beep will sound at

intervals determined by this time. Valid times are from 1 to 255 seconds. If a value of

000 is programmed, NO speech or beep will be heard.

Zone type assignment: The extended monitor function is based on zone types, input the total of all of the zone

type values that are to be monitored by the extended monitor function.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Sin comentarios

AMX APEX Destiny 6100 Especificaciones Pagina 64