AMX APEX Destiny 6100 Especificaciones descargar pdf (Pagina 28)

5801

Button 1

Button 3 Button 2

Button 4

5804

Button 4

Button 3

Button 2

Button 1

Button Type Devices

Portable Transmitters - Not Supervised

7 digit serial number: Enter the serial number listed on the bar code label. Only enter the seven numbers.

The leading letter on the label is not used.

Accept serial number: If the serial number is correct, press F2. Otherwise, press monitor and enter the correct

value.

3 digit function code: Enter code from the Button Functions chart.

If the transmitter has multiple buttons, the prompt will advance to the next button:

2 digit user number: Enter the user number assigned to arming functions.

X-10

X-10 On or Off commands can be used as a zone input. The system will prompt:

1 digit input number: The system supports up to 8 separate X-10 addresses as valid inputs. Enter the X-10

input channel number to be used. Legal values are 1 - 8. Use the locations below to

program the X-10 CHU assignment (listed in the "Control Channel" section), and button

functions for On and/or Off commands. When an X-10 input is used for an arming

function, the system refers to user 32 options. X-10 inputs are not UL listed for fire and

burglary functions and are intended for home automation.

Keypad

1 digit keypad number: The system supports addressable and non-addressable keypads. Each addressable

keypad (up to 8) has programmable key combinations, a zone number assignment, and

the ability to program a four word description that is spoken during keypad alert

activations. For more information, see the Keypad section of this manual. Those

keypads that are not addressable share keypad address number 1. For non-addressable

keypads, enter 1, for addressable, enter 1-8. Note, if keypads are not assigned to a zone

they are assigned to zone 96 by default.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 83 84

Sin comentarios

AMX APEX Destiny 6100 Especificaciones Pagina 28