AMX APEX Destiny 6100 Especificaciones Pagina 22
- Pagina / 84
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
22
Using This Manual:
This manual is not designed to be read like a book. The layout is intentionally designed as a reference guide that
allows quick access to information while programming the system. It is strongly recommended that a first time
installer attended training or bench test a system before attempting the first installation. For information on APEX
training contact the sales department at 800-272-7937.
The layout of this manual is broken into eight separate sections. Each section begins with locations and ends with
a full description of each option found in the location section. There are four styles of programming information in
the system:
Automated Locations: Automated Location prompt for specific information and automatically record the
appropriate information into the correct locations.
Value Locations: A documented location that contains a specific value (i.e. time, user number, etc.)
Option Location: Most system options require a total of option values to be placed in a location.
Example:
Options - Enter Total Location Value
Speak remote control menu (Not evaluated for UL installation)
................................
001
Speak time and date when time is requested
..............................................................
002
Speak temperature when time is requested (See "Using a TS16")
................................
004
Enable answer service override callback
.....................................................................
008
Default
..............................................................................................
0135
................
003
The bold 001 and 002 states the values are included in a defaulted panel. To include the 3rd option,
add 004 and enter the total (007) in location 0135. If no options were selected, enter 000.
Charts: Charts are used to provide a large number of locations in a small space. Depending
on how the section is used, the locations in charts contain either an option value or
a discreet value.
Example:
Options Value
2 end-of-line resistor supervision
..................................................................................
064
No end of line resistor (Not evaluated for UL installation)
..........................................
128
Default (1 end-of-line resistor)
.....................................................................................
000
The inputs across the top refer to which of the 16 terminals across the top the location is referring to.
Below each input is a location. To program system input number 11 for 2 resistor supervision, enter
2474,064. Each location referenced above is shipped with a 000 default.
- DESTINY 6100 1
- Software Revisions 4
- Table of Contents 5
- System Options and Times 6
- Central Station Features 6
- User Codes 7
- Control Channels 7
- Specifications 8
- Inserting the Cabinet Lock 11
- Mounting the Control Board 11
- To House 12
- From Phone 12
- Wiring Notes 13
- System Terminals 14
- X-10 Interface Cord 16
- Program Mode 18
- Locations and Values 18
- Automated Locations 18
- Exiting Program Mode 18
- Programming 18
- Quick Start 19
- System Input Overview 20
- Programming System Inputs 20
- System Setup Example 21
- Using This Manual: 22
- Program a Zone 23
- Zone Questions 23
- * Zone Type 24
- Zone Options 1 24
- Zone Options 2 24
- Hardware Device Types 25
- Predefined Zone Assignments 25
- Hardwire Inputs 26
- 5816 (MN) 5817 27
- Button Type Devices 28
- Button Functions 29
- Editing Zone Programming 30
- Deleting a Zone 30
- Smoke Verification 33
- Speaker (Bell) Supervision 34
- RF Jam Detection 34
- System Options - Group 1 36
- System Options - Group 2 36
- System Options - Group 3 36
- System Options - Group 4 37
- System Options - Group 5 37
- System Options - Group 6 37
- System Access Codes 37
- System Times 38
- Monitor Trouble Conditions 38
- Bypass Options 38
- Phone Access Options 39
- Event Memory Log 39
- Communicator Times 46
- Two-Way Voice Options 46
- Two-Way Digit Assignments 47
- Report Codes 49
- Dialer Options 51
- Communicator Diagnostics 51
- User Communicator Test 51
- Central Station Terms 52
- Key Function Values 56
- Keypad Option 56
- Keypad Functions 57
- TS16 Group 1 57
- TS16 Group 2 57
- Keypad Area Assignment 57
- User Code + Digit Functions 58
- Extended Monitor Times 58
- Vocabulary 59
- Keypad Function Terms 61
- User Code Options 65
- Disappearing Code Activations 65
- Assigning User Codes to Areas 65
- User Code Terms 66
- Automation Overview 67
- Automation Example 67
- Channel Activations 68
- Control Channel Options 1 69
- Control Channel Options 2 69
- Control Channel Options 3 69
- Control Channel Options 4 69
- Control Channel Locations 70
- System Triggers 71
- X-10 Options 71
- Output Control Assignments 72
- Chain Group Assignments 73
- Control Channel Terms 74
- ADEMCO LIMITED WARRANTY 84
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AMX APEX Destiny 6100
(18 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales