AMX APEX Destiny 6100 Especificaciones descargar pdf (Pagina 23)

Program a Zone

Each input used in the system must be assigned a zone number and zone options to allow the system to process

opens and closes in the desired manner. To simplify the process, the system has an automated menu system that

only requests a small amount of information. Based on the responses, the software will automatically set defaults

and establish the link between the zone number and hardware.

The first five questions for zone programming are always the same. During these questions the Monitor button will

return to the previous question, F1 will play the current value, and F2 will accept the current value and advance to

the next prompt.

At any time during the zone programming process, the A key will clear an entry for the current prompt. The H key

returns the system to the first prompt. From the first prompt, the H key will exit to program mode.

Note: when H is pressed, any programming changes for the current zone are lost, pressing H after an F2

confirmation will still erase any changes. Zone programming selections are saved only after the final

question is answered and the system advances to the "Next Zone" prompt.

Zone Questions

Enter program mode: Default 9,1,7,3. The panel will speak "Enter Program Mode"

Enter 9,9,4,0: Program a zone automated location.

2 digit zone number: Enter the desired zone number 01 - 96. For zones under 10 use a leading zero (1=01).

3 digit zone type: Enter the desired three digit value from the Zone Type chart (next page). If the

hardware device type for this zone is a under the "Button" device heading, use 015 as

the zone type.

3 digit zone options 1: Add the values for the desired options in the Zone Options 1 chart (next page) and enter

the total as a three digit number. Use a leading zero as necessary. If the hardware

device type for this zone is a under the "Button" device heading, use 000 as Option 1.

3 digit zone options 2: Add the values for the desired options in the Zone Options 2 chart and enter the total as

a three digit number. Use a leading zero as necessary. If the hardware device type for

this zone is a under the "Button" device heading, use 000 as Option 2.

3 digit device type: Enter the three digit number corresponding to the device for this zone in the

Hardware Device Type chart (next page).

To accept device: If the device number is correct, press F2. Otherwise, press monitor and enter the correct

value.

Once F2 is pressed, Monitor will not step back to the device prompt.

If a mistake has been made, press H, and reprogram the zone

The common Zone information is complete, proceed to the appropriate hardware device

type questions for information on prompts that correspond to specific hardware. This

information is found immediately after the zone options on the next page.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Sin comentarios

AMX APEX Destiny 6100 Especificaciones Pagina 23