AMX APEX Destiny 6100 Especificaciones Pagina 61
- Pagina / 84
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
61
Keypad Function Terms
Keypad Automated Programming Locations
Clear user codes: This location will erase user codes 2 through 32.
Clear keypad status: Under very unusual circumstances, a keypad may not receive a transmission from the
control panel resulting in a status message not being cleared. This command clears all
status messages at the keypad.
Enter zone / TS16 / Area This location provides a method for adding up to a four word description for each zone
description: in the system. The panel will prompt for a three digit zone number followed by prompts
for 4 words. Enter the three digit value for the desired word. If programming fewer than
4 words or to exit, press H. Zones 97 - 112 contain words for TS16 1-16. Zones 113-120
contain the words for split arming area 1 - 8.
Enter channel description: This location provides a method for adding up to a four word description for each control
channel in the system. The panel will prompt for a two digit channel number followed
by prompts for 4 words. Enter the three digit value for the desired word. If programming
fewer than 4 words or to exit, press H. Valid channels are 01 - 56.
Speak zone / TS16 / Area This routine prompts for a three digit zone number. The system speaks the description
description: associated with the selected zone. Zones 97 - 112 contain words for TS16 1-16. Zones
113-120 contain the words for split arming area 1 - 8.
Speak channel description: This routine prompts for a two digit channel number. The system speaks the
description associated with the selected channel. Valid channels are 01 - 56.
Speak selected word: This is used to play a specific word from the vocabulary.
Key Function Values
Speak Time: Assign to a key to speak system time.
Monitor toggle: Toggle the monitor mode.
Speak long term memory: The system maintains a long term alarm memory for all alert activations. This is useful
for identifying zones that cause the system to go into alarm. The zone activations can
be retrieved by entering a valid user code followed by the 8 key. The system will speak
up to 8 alert activations in order starting with the most recent.
Silence Day Zone: Cancels a day zone and extended monitor activation.
Speak Status: Speak current system status.
24 Hour Fire: Initiate a fire alert activation.
24 Hour Panic: Initiate a panic activation.
24 Hour Silent: Initiate a silent alarm activation.
24 Hour Emergency: Initiate an emergency alarm.
- DESTINY 6100 1
- Software Revisions 4
- Table of Contents 5
- System Options and Times 6
- Central Station Features 6
- User Codes 7
- Control Channels 7
- Specifications 8
- Inserting the Cabinet Lock 11
- Mounting the Control Board 11
- To House 12
- From Phone 12
- Wiring Notes 13
- System Terminals 14
- X-10 Interface Cord 16
- Program Mode 18
- Locations and Values 18
- Automated Locations 18
- Exiting Program Mode 18
- Programming 18
- Quick Start 19
- System Input Overview 20
- Programming System Inputs 20
- System Setup Example 21
- Using This Manual: 22
- Program a Zone 23
- Zone Questions 23
- * Zone Type 24
- Zone Options 1 24
- Zone Options 2 24
- Hardware Device Types 25
- Predefined Zone Assignments 25
- Hardwire Inputs 26
- 5816 (MN) 5817 27
- Button Type Devices 28
- Button Functions 29
- Editing Zone Programming 30
- Deleting a Zone 30
- Smoke Verification 33
- Speaker (Bell) Supervision 34
- RF Jam Detection 34
- System Options - Group 1 36
- System Options - Group 2 36
- System Options - Group 3 36
- System Options - Group 4 37
- System Options - Group 5 37
- System Options - Group 6 37
- System Access Codes 37
- System Times 38
- Monitor Trouble Conditions 38
- Bypass Options 38
- Phone Access Options 39
- Event Memory Log 39
- Communicator Times 46
- Two-Way Voice Options 46
- Two-Way Digit Assignments 47
- Report Codes 49
- Dialer Options 51
- Communicator Diagnostics 51
- User Communicator Test 51
- Central Station Terms 52
- Key Function Values 56
- Keypad Option 56
- Keypad Functions 57
- TS16 Group 1 57
- TS16 Group 2 57
- Keypad Area Assignment 57
- User Code + Digit Functions 58
- Extended Monitor Times 58
- Vocabulary 59
- Keypad Function Terms 61
- User Code Options 65
- Disappearing Code Activations 65
- Assigning User Codes to Areas 65
- User Code Terms 66
- Automation Overview 67
- Automation Example 67
- Channel Activations 68
- Control Channel Options 1 69
- Control Channel Options 2 69
- Control Channel Options 3 69
- Control Channel Options 4 69
- Control Channel Locations 70
- System Triggers 71
- X-10 Options 71
- Output Control Assignments 72
- Chain Group Assignments 73
- Control Channel Terms 74
- ADEMCO LIMITED WARRANTY 84
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AMX APEX Destiny 6100
(18 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales