AMX APEX Destiny 6100 Especificaciones descargar pdf (Pagina 19)

Quick Start

Keypad connection: Connect a hardwire keypad to keypad terminals on the control board, be certain to

properly match the colors as follows: Black to BLK, Red to RED, Green to GRN, White

to WHT.

Speaker connection: Connect the violet keypad speaker leads to the INT and COM terminals on the control

board.

Power connection: Connect the power transformer to the AC terminals on the control board and plug the

transformer into an unswitched 120 VAC outlet.

Apply power: Turn the power switch to the ON position (up). Wait for a start tone(s) followed by a

pause and two beeps.

Setting time and day: The panel MAY prompt "Press 2 and 8 to set time" if the clock was not set prior to transit

or if the capacitor responsible for sustaining the clock dissipated during transit and

stocking. Press the 2 and 8 keys on the keypad simultaneously. The panel will prompt

for a 4 digit time (use a leading 0 for times under 10:00), followed by a prompt for AM

or PM. The next prompt is for the day of the week (1-Sunday, 2-Monday, 3-Tuesday,

4-Wednesday, 5-Thursday, 6-Friday, 7-Saturday). Enter a two digit month, two digit

date and two digit year.

Arm and disarm: Press the A key on the keypad and the green AWAY LED will light. ARMED TO

AWAY will be heard through the speaker. To disarm, push 1,2,3,4 (default Primary User

Code) on the keypad. The AWAY LED will go out and CONTROL IS DISARMED will

be heard.

Default Panel: To ensure erroneous values are not stored in memory from the manufacturing and/or

testing the panel should be defaulted before installation. Enter 9,1,7,3 followed by

9,9,8,2.

Program: Proceed with programming to suit the installation.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Sin comentarios

AMX APEX Destiny 6100 Especificaciones Pagina 19