AMX APEX Destiny 6100 Especificaciones descargar pdf (Pagina 54)

3/1 format: Communication format consisting of a 3 digit account number followed by a single digit

(hexadecimal) activation type.

4/2 format: Communication format consisting of a 4 digit account number followed by a two digit

(hexadecimal) activation type.

4/2 extended format: Communication format consisting of two lines of information:

line 1: 4 digit account number followed by a two digit (hexadecimal) activation type.

line 2: Last digit from line 1 repeated 4 times followed by a two digit (decimal) zone

number.

4/1/1 format: Communication format consisting of a 4 digit account number followed by a single digit

(hexadecimal) activation type and a single digit (hexadecimal) zone number (15 max).

Zones above 15 are reported as "F."

Ademco Contact ID: A DTMF based reporting format. If this format type is enabled, it is not necessary to

program report codes. It is still necessary to program the dialer options.

Two Way Options

Two Way Callback: Central stations that do not support two-way voice after a communicator transmission

may require two-way callback. With this option enabled (System Option Group 3) the

control panel will wait a programmed period of time (0461) after a digital

communication for the central station to call. Two-way voice is not evaluated for UL

installation.

There are three security options associated with two-way callback, one digit access, full

code access, and entering 0 to exit to keypad mode. If either of the access code

options are selected, the panel will answer the phone and play a repeated beep until a

valid code is entered or the two-way callback time expires. If neither code option is

selected, the system will be in listen-in mode when the phone is answered. Without the

"0 exits to keypad mode" options selected, the central station will not have access to

keypad mode.

Automatic Communicator Test

Choose if the communicator should send a test signal daily, weekly or monthly and

enter the appropriate value in location 0166.

Daily: enter 000.

Weekly: enter 064 plus the value of the day to be used. To communicate on

every Tuesday, a value of 067 would be entered.

Monthly: enter 128 plus the day of the month to be used. To communicate on the

12th of every month, a value of 140 would be entered. If a day is chosen

that is greater than the number of days in a given month, the transmission

will occur on the last day of the month.

Enter automatic communicator test time in 24 hour format in location 9995.

For a UL installation, a communicator test must be performed daily.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 83 84

Sin comentarios

AMX APEX Destiny 6100 Especificaciones Pagina 54