AMX APEX Destiny 6100 Especificaciones Pagina 40
- Pagina / 84
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
40
Set time and date: After entering 9991 the system will prompt "Enter Eleven." The time, day, and date are
entered in the following format HHMMWMMDDYY.
HHMM - Military time, if the hour value is less than 10 use a leading zero.
W - Day of the week: 1-Sun 2-Mon 3-Tue 4-Wed 5-Thr 6-Fri 7-Sat.
MM - Month. Months less than 10 use a leading zero.
DD - Day of Month. Days less than 10 use a leading zero.
YY - Enter the last 2 digits of the year.
Auto arm/disarm: Choose the arming and disarming options and enter the total in location 0169. Use
location 9993 to enter the arm and disarm times in 24 hour format. Location 0169
requires the sum of selected options. If 001 and 002 are programmed together, arming to
AWAY will take precedence. If arm and disarm options are both selected, setting the
same time for both will never produce an automatic disarm. When 016 is not selected
and there are zones open the system will not arm. In a partitioned system, the control
will use the areas designated for user code 32 to determine areas to arm and/or disarm.
Automatic arm/disarm is not permitted in a UL installation.
Speak time and date: This allows a convenient method to check the system time and date in program mode.
System Options - Group 1
Control of remote With this option programmed, the automatic turning on and off of control channels will
channels only in AWAY: take place when the system is armed to AWAY. Control channels are not UL listed for
fire or burglary functions and are intended for home automation.
Disarm before rearm: With this option selected, the system can only be armed from AWAY to HOME after
disarming and vice versa. This prevents an intruder from turning off interior protection if
they are able to circumvent perimeter protection.
Mute external speakers: This option sends all tones to the inside speaker and is adjustable with the inside speaker
volume adjustment. The external speaker channel is turned off. The main use of this
feature is for testing alarm activations.
Access code before arm: In this configuration, a full access code (arm/disarm code) must be entered to arm the
system. Once armed, the system must be disarmed to allow a change from one arming
mode to another.
Speak pre-alarm: When this option is selected the system will repeat "ENTRY DETECTED" followed by a
zone description during pre-alarm in place of a low volume siren tone.
3 Digit disarm code: This is a global option that converts all access codes to 3 digits instead of the traditional
4 digits.
Speak system status: When this option is selected, the system speaks status through the inside speaker or over
the phone three seconds after pressing the first digit of a disarm code.
System Options - Group 2
Automatic force arm: Without this option enabled, if a user attempts to arm the system with a zone open, the
system will respond with "ZONES OPEN". The user can then "force arm" around the
open zone. This temporarily bypasses the zone until the zone is closed. If this option is
enabled, the open zone will automatically be temporarily bypassed (force armed) on the
first key press. The user is never notified that zones are open unless system status is
requested. Automatic force arm is not permitted in a UL installation.
No exterior instant When enabled, this option will eliminate the exit delay on all exterior instant zones
exit delay: following arming to either HOME or AWAY.
- DESTINY 6100 1
- Software Revisions 4
- Table of Contents 5
- System Options and Times 6
- Central Station Features 6
- User Codes 7
- Control Channels 7
- Specifications 8
- Inserting the Cabinet Lock 11
- Mounting the Control Board 11
- To House 12
- From Phone 12
- Wiring Notes 13
- System Terminals 14
- X-10 Interface Cord 16
- Program Mode 18
- Locations and Values 18
- Automated Locations 18
- Exiting Program Mode 18
- Programming 18
- Quick Start 19
- System Input Overview 20
- Programming System Inputs 20
- System Setup Example 21
- Using This Manual: 22
- Program a Zone 23
- Zone Questions 23
- * Zone Type 24
- Zone Options 1 24
- Zone Options 2 24
- Hardware Device Types 25
- Predefined Zone Assignments 25
- Hardwire Inputs 26
- 5816 (MN) 5817 27
- Button Type Devices 28
- Button Functions 29
- Editing Zone Programming 30
- Deleting a Zone 30
- Smoke Verification 33
- Speaker (Bell) Supervision 34
- RF Jam Detection 34
- System Options - Group 1 36
- System Options - Group 2 36
- System Options - Group 3 36
- System Options - Group 4 37
- System Options - Group 5 37
- System Options - Group 6 37
- System Access Codes 37
- System Times 38
- Monitor Trouble Conditions 38
- Bypass Options 38
- Phone Access Options 39
- Event Memory Log 39
- Communicator Times 46
- Two-Way Voice Options 46
- Two-Way Digit Assignments 47
- Report Codes 49
- Dialer Options 51
- Communicator Diagnostics 51
- User Communicator Test 51
- Central Station Terms 52
- Key Function Values 56
- Keypad Option 56
- Keypad Functions 57
- TS16 Group 1 57
- TS16 Group 2 57
- Keypad Area Assignment 57
- User Code + Digit Functions 58
- Extended Monitor Times 58
- Vocabulary 59
- Keypad Function Terms 61
- User Code Options 65
- Disappearing Code Activations 65
- Assigning User Codes to Areas 65
- User Code Terms 66
- Automation Overview 67
- Automation Example 67
- Channel Activations 68
- Control Channel Options 1 69
- Control Channel Options 2 69
- Control Channel Options 3 69
- Control Channel Options 4 69
- Control Channel Locations 70
- System Triggers 71
- X-10 Options 71
- Output Control Assignments 72
- Chain Group Assignments 73
- Control Channel Terms 74
- ADEMCO LIMITED WARRANTY 84
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AMX APEX Destiny 6100
(18 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales