AMX NXV-300 Especificaciones descargar pdf (Pagina 74)

Appendix A: Telnet Commands

NXV-300 Modero Virtual Touch Panel

Terminal Commands (Cont.)

Command Description

SET IP Sets the IP configuration.

Enter a Host Name, Type (DHCP or Fixed), IP Address, Subnet Mask, and

Gateway IP Address.

Note: For NetLinx Central Controllers, the "Host Name" can only 

consist of alphanumeric characters.

• Enter Y (yes) to approve/store the information into the NXV-300.

• Enter N (no) to cancel the operation.

Note: The NXV-300 must be rebooted to enable new settings.

Example:

>SET IP

--- Enter New Values or just hit Enter to keep current

settings ---

Enter Host Name: MLK_INSTRUCTOR

Enter IP type. Type D for DHCP or S for Static IP and then

Enter: DHCP

Enter Gateway IP: 192.168.21.2

You have entered: Host Name MLK_INSTRUCTOR

Type DHCP

Gateway IP 192.168.21.2

Is this correct? Type Y or N and Enter -> y

Settings written. Device must be rebooted to enable new

settings.

SET TELNET PORT Sets the IP port listened to for telnet connections.

SETUP Displays the panel setup page.

SHOW CONNECTION LOG Shows the connection logs for the panel.

SHOW CONNECTION STATS Shows the connection logs for the panel.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80

Sin comentarios

AMX NXV-300 Especificaciones Pagina 74