AMX NXV-300 Especificaciones descargar pdf (Pagina 29)

NetLinx Programming

NXV-300 Modero Virtual Touch Panel

NetLinx Programming

The NXV-300 may be programmed, using the commands in this section, to perform a wide variety of operations using

Send_Commands and variable text commands.

A device must first be defined in the NetLinx programming language with values for the Device: Port: System (in

all programming examples - Panel is used in place of these values and represents all Modero panels).

Button Assignments

Page Commands

These Page Commands are used in NetLinx Programming Language and are case insensitive.

Verify that you are using the latest NetLinx Master and Modero firmware, and verify

that you are using the latest version of NetLinx Studio and TPD4.

• Button Channel Range: 1 - 4000 Button push and Feedback (per address port)

• Button Variable Text range: 1 - 4000 (per address port)

• Button States Range: 1 - 256 (0 = All states, for General buttons 1 = Off state and 2 = On state).

• Level Range: 1 - 600 (Default level value 0 - 255, can be set up to 1 - 65535)

• Address port Range: 1 - 100

These button assignments can only be adjusted in TPD4 and not on the panels

themselves.

Page Commands

@APG Add the popup page to a group if it does not already exist. If the new popup is added to a group which

has a popup displayed on the current page along with the new pop-up, the displayed popup will be

hidden and the new popup will be displayed.

Syntax:

"'@APG-<popup page name>;<popup group name>'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.

popup group name = 1 - 50 ASCII characters. Name of the popup group.

Example:

SEND_COMMAND Panel,"'@APG-Popup1;Group1'"

Adds the popup page ’Popup1’ to the popup group ’Group1’.

@CPG Clear all popup pages from specified popup group.

Syntax:

"'@CPG-<popup group name>'"

Variable:

popup group name = 1 - 50 ASCII characters. Name of the popup group.

Example:

SEND_COMMAND Panel,"'@CPG-Group1'"

Clears all popup pages from the popup group ’Group1’.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 79 80

Sin comentarios

AMX NXV-300 Especificaciones Pagina 29