AMX NXV-300 Especificaciones descargar pdf (Pagina 23)

Setup Pages and Descriptions

NXV-300 Modero Virtual Touch Panel

G4 Web Control Page

The G4 Web Control page (FIG. 18) centers around enabling and disabling both the display and control of your panel via

the Web. An external computer or Netbook running a VNC client such as Bonjour, installed during the initial

communication to the G4 panel, makes this possible.

The NXV-300 supports the open standard Virtual Network Computing (VNC) interface. This device contains a VNC

server that allows it to accept a connection from any other device running a VNC client. Once a connection is established

to that target device, the client can control the device remotely. The elements of the G4 Web Control Settings page are as

follows:

System Settings Page - Master Tab Elements

System Number: Allows you to enter a system number. Default value is 0 (zero).

Master IP/URL: Sets the Master IP or URL of the NetLinx Master. This field is only enabled when selecting either

the URL or the URL(UDP) Modes.

Master Port Number: Enters the port number used with the NetLinx Master.

• Default value is 1319.

Username/Password: If the target Master has been previously secured, enter the alphanumeric string (into each field)

assigned to a pre-configured user profile on the Master. This profile should have the pre-defined

level of access/configuration rights.

NDP Name: The Nexus Delivery Protocol name for the device. The NDP name allows use of a master web

interface, NetLinx Studio 2.4 or commands to bind the device with NetLinx masters.

Save & Reboot: Saves any changes and reboots the device in order to implement those changes.

Cancel: Returns to the previous page without saving any changes.

FIG. 18

G4 Web Control Settings page

G4 Web Control Settings Page Elements

Connection Status icon: This visual display of the connection status allows the user to have a current visual update

of the panel’s connection status regardless of what page is 

currently active.

• A Lock only appears on the icon if the panel has established a connection with a

currently secured target Master (requiring a username and password).

G4 Web Control Settings: Sets the remote control values for the touch panel and contains:

Enabled • The Enabled button activates the G4 Web Control feature on the panel and allows

an external PC running a VNC client to access the panel after the remaining fields

are configured. This button is always on.

Timeout: Sets the length of time (in minutes) the panel can remain idle (no cursor 

movements) before the session is closed and the user is disconnected.

• Minimum value = 0 minutes (panel never times-out)

• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)

Network Interface Displays the detected method of communication to the web:

• Wired is used when a direct Ethernet connection is being used for communication to

the web. This is the only setting.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Sin comentarios

AMX NXV-300 Especificaciones Pagina 23