AMX NXV-300 Especificaciones descargar pdf (Pagina 12)

Setup Pages and Descriptions

NXV-300 Modero Virtual Touch Panel

3. The browser will bring up the main touch panel page. To open the Setup pages, press and hold the Reset Button on

the front of the device for 5 seconds.

4. Access the Protected Setup pages, using your password if necessary. The unit’s IP Address is displayed in the

System Settings - IP page in the Protected Setup pages.

At this point, you can assign a static IP Address if necessary.

If no DHCP server can be detected by the device, then the device will default to the IP address 169.254.2.2 and change

the IP setting to Static. To connect to a DHCP server in the future, the device must be reset by holding and pressing the

Reset button on the front of the device for 30 seconds.

Accessing the NXV-300

From any computer or Netbook that has access to the LAN that the NXV-300 resides on, open a web browser and type

the IP address of the target NXV-300 unit in the Address Bar.

FIG. 5 System Settings - IP page and IP address

Current IP Address

Bonjour for Windows operates as a plug-in for Microsoft Internet Explorer, and is

displayed in the IE Explorer Bar. If you have installed Bonjour for Windows, but don’t

see the Bonjour toolbar icon, you may need to "unlock" and expand the toolbars to

see it.

The default state of the NXV-300 allows anyone with the device IP address to access

the device, up to the maximum of three users at a time. This access status may be

changed by setting a password through the G4 Web Control page, which then

prompts the user to enter the password when accessing the device.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Sin comentarios

AMX NXV-300 Especificaciones Pagina 12