AMX NXV-300 Especificaciones descargar pdf (Pagina 54)

NetLinx Programming

NXV-300 Modero Virtual Touch Panel

"^" Button Commands (Cont.)

^TEF Set the text effect. The Text Effect is specified by name and can be found in TPD4.

Syntax:

"'^TEF-<vt addr range>,<button states range>,<text effect name>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

text effect name = Refer to theText Effects table on page 49 for a listing of text effect names.

Example:

SEND_COMMAND Panel,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow 3'"

Sets the text effect to Soft Drop Shadow 3 for the button with variable text range 500-504 and 510-

515.

^TOP Enables/disables touch output to Master. If enabled, Press/Move/Release events are sent to the

Master as string events.

Syntax:

"'^TOP-<state>'"

<state> is 0(disable) 1(presses/releases), 2(moves), 3(press/move/release).

Note: Move should be used with caution. This setting can generate a significant amount of traffic to

the master depending on user interaction.

Example command: "'^TOP-1'"

Example Response: "String Event: Text: Press,320,480"

Example Response: "String Event: Text: Release,320,480"

^TXT Sets Non-Unicode text. Assign a text string to those buttons with a defined address range.

Syntax:

"'^TXT-<vt addr range>,<button states range>,<new text>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

new text = 1 - 50 ASCII characters.

Example:

SEND_COMMAND Panel,"'^TXT-500.504&510.515,1&2,Test Only'"

Sets the On and Off state text for buttons with the variable text ranges of 500-504 & 

510-515.

^UNI Set Unicode text. For the ^UNI command (%UN and ^BMF command), the Unicode text is sent as

ASCII-HEX nibbles.

Syntax:

"'^UNI-<vt addr range>,<button states range>,<unicode text>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

unicode text = Unicode HEX value.

Example:

SEND_COMMAND Panel,"'^UNI-500,1,0041'"

Sets the button’s unicode character to ’A’. 

Note: To send the variable text ’A’ in unicode to all states of the variable text



button 1, (for which the character code is 0041 Hex), send the following command:

SEND_COMMAND TP,"'^UNI-1,0,0041'"

Note: Unicode is always represented in a HEX value. TPD4 generates (through the Text Enter Box

dialog) unicode HEX values. Refer to the TPDesign4 Instruction Manual for more information.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 79 80

Comentarios a estos manuales

Sin comentarios

AMX NXV-300 Especificaciones Pagina 54

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AMX NXV-300