AMX NXV-300 Especificaciones Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
Appendix A: Telnet Commands
Terminal Commands
The Terminal commands listed in the following table can be sent directly to the NXV-300 via Telnet terminal session.
In your terminal program, type "Help" or a question mark ("?") and <Enter> to access the Help Menu, and display the
Program port commands described below:
Terminal Commands
Command Description
----- Help ----- (Extended diag messages are OFF)
? or Help Displays this list of commands.
DISK FREE Displays the total amount of free space on the disk.
Example:
>DISK FREE
The disk has 2441216 bytes of free space.
DNS LIST <D:P:S> Displays the DNS configuration of a specific device including:
Domain suffix·
Configured DNS IP Information
Example:
>DNS LIST [0:1:0]
Domain suffix:amx.com
The following DNS IPs are configured
Entry 1-192.168.20.5
Entry 2-12.18.110.8
Entry 3-12.18.110.7
ECHO ON|OFF Enables/Disables echo (display) of typed characters.
GET CACHE ENABLE Get the state of the image cache flash backup.
GET CACHE EXPIRE Get the current expiration time for image cache entries.
GET CACHE SIZE Set the maximum size for the flash cache.
GET CONFIG Shows the current configuration.
GET DNS Shows the DNS configuration of a device.
GET IP Displays the current IP configuration.
Example:
>GET IP
IP Settings
HostName MLK_INSTRUCTOR
Type DHCP
IP Address 192.168.21.101
Subnet Mask 255.255.255.0
Gateway IP 192.168.21.2
MAC Address 00:60:9f:90:0d:39
MEM Displays the largest free block of the NXV-300’s memory.
Example:
>MEM
The largest free block of memory is 11442776 bytes.
MSG ON|OFF Enables/Disables extended diagnostic messages.
MSG On sets the terminal program to display all messages generated by
the NXV-300.
MSG OFF disables the display.
Example:
> MSG ON
Extended diagnostic information messages turned on.
> MSG OFF
Extended diagnostic information messages turned off.
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Comentarios a estos manuales

Sin comentarios