AMX NI-3100 Especificaciones descargar pdf (Pagina 97)

NetLinx Programming

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

IR / Serial Ports Channels

IR RX Port Channels

IR/Serial SEND_COMMANDs

The following IR and IR/Serial Send_Commands generate control signals for external equipment. In these

examples: <DEV> = device.

IR / Serial Ports Channels

CHANNELS: Description

00001 - 00229 IR commands.

00229 - 00253 May be used for system call feedback.

00254 Power Fail. (Used w/ 'PON' and 'POF' commands).

00255 Power status. (Shadows I/O Link channel status).

00256 - 65000 IR commands.

65000 - 65534 Future use.

The NI series of NetLinx Masters support Serial control via the IR/RX port when using

firmware version 300 or greater.

IR / Serial Ports Channels

00001 - 00255 PUSH and RELEASE channels for the received IR code.

IR/Serial SEND_COMMANDs

Command Description

CAROFF

Disable the IR carrier signal

until a 'CARON' command is

received.

Syntax:

SEND_COMMAND <DEV>,"'CAROFF'"

Example:

SEND_COMMAND IR_1,"'CAROFF'"

Stops transmitting IR carrier signals to the IR_1 port.

CARON

Enable the IR carrier signals

(default).

Syntax:

SEND_COMMAND <DEV>,"'CARON'"

Example:

SEND_COMMAND IR_1,"'CARON'"

Starts transmitting IR carrier signals to the IR_1 port.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 159 160

Sin comentarios

AMX NI-3100 Especificaciones Pagina 97