AMX NI-3100 Especificaciones Pagina 15
- Pagina / 160
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Initial Configuration and Firmware Upgrade
5
NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)
Initial Configuration and Firmware Upgrade
Overview
This section describes using the NetLinx Studio software application to perform the initial configuration of the
Master, as well as upgrading the firmware for various Master components.
NetLinx Studio is used to setup a System number, obtain/assign the IP/URL for the connected NI
Controller, and transfer firmware Kit files to the Master.
NetLinx Studio is available to download (free of charge) from www.amx.com.
Before You Start
1. Verify you have the latest version of NetLinx Studio on your PC. Use the Web Update option in NetLinx
Studio’s Help menu to obtain the latest version. Alternatively, go to www.amx.com and login as a Dealer
to download the latest version.
2. Verify that an LAN/ICSNet cable is connected from the NI Controller to the LAN Hub.
3. Connect an programming cable (RS-232) from the Program Port on the NI Controller to a COM port on
the PC being used for programming.
4. Verify that any control cards (NI-4000 and NI-4100 only) are inserted and their respective connectors are
attached to the rear of the NI Controller before continuing.
5. Verify that the NI Controller is powered On.
Preparing the NI Controller for Serial Communication
To establish serial communication with the Controller via the PROGRAM (DB9) port:
1. Launch NetLinx Studio 2.x (default location is Start > Programs > AMX Control Disc > NetLinx
Studio 2 > NetLinx Studio 2).
2. Select Settings > Master Communication Settings, from the menu bar, to open the Master
Communication Settings dialog box.
3. Click the Communications Settings button to open the Communications Settings dialog.
4. Click the NetLinx Master radio button (from the Platform Selection section) to indicate you are working
with a NetLinx Master.
5. Click the Serial radio button (from the Transport Connection Option section) to indicate you are
connecting to the Master via a COM port.
6. Click the Edit Settings button (on the Communications Settings dialog) to open the Serial Settings dialog
and set the COM port parameters (used to communicate to the NetLinx Master).
7. Click OK to close all dialogs and return to the main application.
8. Right-click the Online Tree tab entry and select Refresh System: the Controller should appear in the
Device Tree. If not, verify that the Serial cable is connected properly, and that the Baud Rate settings on
the Controller (set via the Program Port DIP Switch) match the settings in NetLinx Studio.
Once Serial communication has been established, use NetLinx Studio to configure the Controller for LAN
Communication, as described below.
Before commencing, verify you are using the latest firmware Kit file (this file contains
both the NI Integrated Controller and on-board Master firmware.
The NI-4100/3100/2100 Kit file begins with 2105_04_X100.
The NI-700/900 Kit file begins with 2105_03_NI-X00 and 2105_09_NI-X00
respectively.
- Last Revised: 5/25/2012 1
- Table of Contents 10
- About This Document 12
- Related Documents 13
- Using Zero Configuration 14
- Before You Start 15
- Device Addressing dialog 16
- WebConsole UI Overview 31
- Device Tree 32
- Device Network Settings Pages 33
- ZeroConfig Networking 34
- WebConsole - Security Options 35
- Login Rules 36
- User Name and Password Rules 36
- Allowed Special Characters 36
- Security - System Level 37
- Access Options 38
- Accepting Changes 39
- Configuring Settings 39
- System Security - Group Level 40
- Group Security Details Page 42
- System Security - User Level 44
- Deleting a User 46
- Compression Options 47
- WebConsole - System Options 49
- Diagnostic Options table 54
- Edit Options window 56
- Port Settings 59
- Server Port Settings 59
- SSL Certificate Options 61
- SSL Certificate Entries 62
- Import SSL Certificate window 64
- System - Manage License 68
- System - Manage NetLinx 69
- System - Manage Devices 71
- Manage Devices - Bindings 73
- Adding a User-Defined Device 77
- Editing Polled Port Settings 80
- Manage Devices - URL List 82
- Manage Devices - Log 85
- Manage Devices - Diagnostics 86
- NetLinx Programming 89
- Master SEND_COMMANDs (Cont.) 90
- Port: System 91
- RS232/422/485 Ports Channels 92
- IR / Serial Ports Channels 97
- IR RX Port Channels 97
- IR/Serial SEND_COMMANDs 97
- Input/Output SEND_COMMANDs 103
- I/O SEND_COMMANDs (Cont.) 104
- Overview 105
- Terminal Commands 107
- Terminal Commands (Cont.) 108
- ESC Pass Codes 125
- Setup Security Menu 127
- Security Options Menu 128
- Edit User Menu 129
- Edit Group Menu 129
- Telnet Diagnostics Commands 132
- Linux Telnet Client 133
- IPSec Config file 135
- Internet Key Exchange (IKE) 135
- SpdAddTunnel 138
- SpdAddBypass 139
- SpdAddDiscard 139
- SpdSetProp 140
- SpdSetProp (Cont.) 141
- SpdSetPropAttrib 143
- Manual Key Manager (MKM) 145
- IPSec Security Settings page 153
- Programming API 155
- CLKMGR_GET_ACTIVE_TIMESERVER 156
- (CONSTANT CHAR RECORD[]) 157
- Increase Your Revenue 160
Relacionado con productos y manuales para Gateways / Controladores AMX NI-3100
(40 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales