AMX NI-3100 Especificaciones descargar pdf (Pagina 67)

WebConsole - System Options

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

Selecting a Custom NIST Server

1. In the NIST Servers tab (FIG. 49), use the radio buttons to select one of the NIST Servers in the list.

2. Click Accept to save these settings to the Master.

Adding a Custom NIST Server To the List

1. Click on the radio button next to the last (blank) entry in the NIST Server Manager list.

2. In the URL field, enter the URL of the NIST Server. The URL is used only to help you manage entries,

and is not verified or used internally by the clock manager.

3. Enter the NIST Server’s IP Address in the IP field. This is used internally and must be a valid IP address.

4. Enter the NIST Server’s location in the Location field. This is used only to help the user manage entries

and it is not verified or used internally by the clock manager.

5. Click Accept to save these settings to the Master.

Removing an NIST Server From the List

1. Click on the Remove (x) button to the right of a user-added NIST Server in the NIST Server Manager

list.

2. Click Accept to save these settings to the Master.

FIG. 49 Clock Manager Options - NIST Servers tab

The strings entered into the URL and Location fields are not used to connect to NIST

Servers. The IP Address (entered into the IP field) specifies the NIST Server(s) that

will be used. As stated above, the address entered into the IP field must be must be a

valid IP address (not a URL).

The built-in entries cannot be removed.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 159 160

Sin comentarios

AMX NI-3100 Especificaciones Pagina 67