AMX NI-3100 Especificaciones descargar pdf (Pagina 57)

WebConsole - System Options

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

The default setting is 5 seconds.

4. To add more devices to the Diagnostics Options page:

Repeat steps 1-3.

Alternatively, you can click one of the Edit buttons to open the Edit Options window, and specify a

System Number, Device and Port for a known System Device. Select the Diagnostics messages that

you want to enable for this device and click Update.

The device will appear in the Diagnostics Options window, in the next available column (to the

right of the last device added - see FIG. 42).

Diagnostics Options Definitions

The following table describes each of diagnostics options that can be enabled via the Edit Options window:

FIG. 42 Edit Options window indicating four devices with Diagnostics enabled

You can monitor diagnostics for up to eight System Devices in this page.

Diagnostic Options

Diagnostic Option Description

All Notifications: Enables every notification field.

System

• Number

•Device

•Port:

Use these fields to enter a device:port:system (D:P:S) combination for the device for

which you want to enable notifications.

A value of 0 for any option gives you all of the systems, devices, or ports. This dialog

also allows you to store/recall presets.

Messages

• Online/Offline Generates a message when there is a change in the target device’s online/offline

status.

• Configuration Generates a message when there is a change in the target device’s configuration.

• Status Generates a message when there is a change in the target device’s status.

Channel Changes

• Input Generates a message when there is an input channel change (i.e. Push/Release) in

the target device.

• Output Generates a message when there is an output channel change (i.e. CHON/CHOFF)

in the target device.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 159 160

Sin comentarios

AMX NI-3100 Especificaciones Pagina 57