AMX NI-3100 Especificaciones descargar pdf (Pagina 52)

WebConsole - System Options

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

2. Select either the Control or Emulate option.

3. In the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/

Release, CHON, and CHOFF) for the specified <D:P:S>.

The Channel number range is 1 - 65535.

Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for

the specified <D:P:S>.

4. Select the Push button to Emulate a push/release on the specified channel (not displayed if the Control

option is selected). Click and hold the Push button to observe how the device/Master responds to the push

message.

5. In the Level Code section, enter a valid Level number and Level data value for the specified <D:P:S> and

press the Send button to transmit the level data.

The Level number range is 1 - 65535.

The table below lists the valid Level data types and their ranges:

FIG. 37 Select Control/Emulate from within a selected Device’s Network Settings page

Click on Control/Emulate from within

the device’s Network Settings page

to Control/Emulate that device

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 159 160

Sin comentarios

AMX NI-3100 Especificaciones Pagina 52