AMX NXB-CCG-K Información técnica descargar pdf (Pagina 67)

Lutron® integration protocol

HomeWorks® QS (continued)

System Commands (continued)

AREA Commands

AREA Command Formats

AREA Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Get (?) Occupancy State 8 3 = Occupied

4 = Unoccupied

Example AREA Messages

Operation Command String

Execute: #AREA, Integration ID, Action Number, Parameters

Set area level to 75% (Fade = 4 sec, Delay = 2 sec) #AREA,2,1,70,4,2<CR><LF>

Lower Area. #AREA,2,3<CR><LF>

Query: ?AREA, Integration ID, Action Number

Is the area occupied? ?AREA,2,8<CR><LF>

What is the current active scene? ?AREA,2,6<CR><LF>

Response: ~AREA, Integration ID, Action Number, Parameters

The area is currently occupied. ~AREA,2,8,3<CR><LF>

Area Scene 2 is currently active. ~AREA,2,6,2<CR><LF>

Use “AREA Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Operation

Command

Integration ID (example)

#AREA

, 2, Action Number, Parameters

NOTE

1. AREA commands cannot be sent to areas that contain other areas, such as a ﬂoor or an entire building.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 143 144

Sin comentarios

AMX NXB-CCG-K Información técnica Pagina 67