27
Lutron® integration protocol
QS Standalone (continued)
System Commands (continued)
PROGRAMMING Commands
PROGRAMMING Command-specific fields
Action Numbers and Parameters:
Description Action Number Parameters
Add programming to a phantom button 1 a) Integration ID – The Integration ID of the device
b) Component Number – Always ‘0’ for Shade
c) Level – The level to which the shade being
programmed will go on activation of this button
d) Fade – The time the zone takes to reach the
level specified (maximum 4 hours)
1
e) Delay – The time until the Shade/Zone begins
to change (maximum 4 hours)
Add Scene programming to a phantom button 2 a) Integration ID
b) Component Number (GRAFIK Eye® QS Scene
controller, Energi Savr NodeTM area
2
)
c) Scene Number
Clear programming from a phantom button.
Note: Use 0 to clear programming from all
buttons.
3 None
Configure Stop-If-Moving functionality
Note: Use button 0 to configure Stop-If-Moving
functionality on all buttons.
4 0 = Stop-If-Moving Off
1 = Stop-If-Moving On
Add programming to a phantom button
(Venetian blind, lift and tilt levels)
5 a) Venetian Integration ID
b) Component Number (always 0)
c) Lift level
d) Tilt level
Add programming to a phantom button
(Venetian blind, tilt only)
6 a) Venetian Integration ID
b) Component Number (always 0)
c) Tilt level
Add programming to a phantom button
(Venetian blind, lift only)
7 a) Venetian Integration ID
b) Component Number (always 0)
c) Lift level
NOTES
A maximum of 500 programming assignments can be made in the QSE-CI-NWK-E.
1. Not available for Shades.
2. If a device’s Zone is already assigned to the button, you cannot program a Scene for that Zone. If a Scene is already
programmed for this button for a device, you cannot program another Scene.
PROGRAMMING Command Formats
Integration ID or Serial # of
the QSE-CI-NWK being used
Use “PROGRAMMING Command-specific fields” tables
to complete these command fields.
Operation
Phantom Button Number
(can be 1–100)
Command
#PROGRAMMING, 1, Button Number, Action Number, Parameters
(137 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales