AMX NXB-CCG-K Información técnica descargar pdf (Pagina 125)

125

Lutron® integration protocol

Maestro® Fan Speed Control (continued)

OUTPUT Commands

OUTPUT Command Format

OUTPUT Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Set or Get Zone Level 1 Levels:

0 = Off

1– 25% = Low

26 –50% = Medium

56 –75% = Medium High

76 –100% = High

Example OUTPUT Commands

Examples presume dimmer has been assigned Integration ID 1.

Operation Command String

Execute: #OUTPUT, Integration ID, Action Number, Parameters

Set fan speed to Medium High. #OUTPUT,1,1,75<CR><LF>

Query: ?OUTPUT, Integration ID, Action Number

What is the state of the output? ?OUTPUT,1,1<CR><LF>

Response

: ~OUTPUT, Integration ID, Action Number, Parameters

Output level is set to High. ~OUTPUT,1,1,100.00<CR><LF>

Use “OUTPUT Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Operation

Command

Integration ID (example)

#OUTPUT

, 1, Action Number, Parameters

LUTRON

NOTE

1. Supported only in HomeWorks® QS 4.0 or higher and RadioRA® 2 6.0 or higher.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 143 144

Sin comentarios

AMX NXB-CCG-K Información técnica Pagina 125