AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Manual de instrucciones Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 30
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
PT10-PLV Single Camera Pan/Tilt System
1
P
T10-PLV Single Camera Pan/Tilt System
PT10-PLV Single Camera Pan/Tilt System
The AMX Single-Camera Control System delivers an advanced modular solution for precise
camera positioning applications. The main system component is the PosiTrack Pilot Video touch
panel (PosiPilot) that provides on-screen camera preview and controls the AXB-PT10 camera pan/
tilt head over a 4-wire (AXlink) data bus. The system can control up to six Sony
®
DXC-390/950
video cameras and store/recall up to 24 presets for each camera.
The PT10-PLV Single Camera Pan/Tilt System configuration is the building block for all systems
utilizing up to six cameras with Sony CMA-D2/D3 (camera adapters).
PT10-PLV System Components
AXP-PLV PosiTrack Pilot Video Panel Camera Controller
(PosiPilot)
The AXP-PLV PosiTrack Pilot Video Panel Camera Controller
(PosiPilot) provides integrated, programmable control of pan/tilt
heads and lenses. The integrated color video touch panel gives
you touch control and on-screen video monitoring.
AXB-PT10 Pan/Tilt Camera Head
This AXB-PT10 is a fully integrated camera-positioning controller
that provides on-board control of camera pan/tilt, and lens zoom/
focus/iris.
The AXB-PT10 power rating is 2 A @ 12 VDC. This power supply
must be local.
AXB-EM232 Enhanced Master/RS-232 Controller
The AXB-EM232 is the AMX Master Controller used in every con-
figuration described in this manual, with the exception of the Multi-
camera configuration with CMA-D3 (up to 100 m). The multi-cam-
era/D3 configuration uses an AXCENT
3
Master Controller (which
has additional RS-232 ports).
PS2.8 Power Supply
The PS2.8 Power Supply provides up to 2.8 A of regulated power,
automatically switches for 110/220 V AC operation, and is over-
load protected.
The PS2.8 supplies power to both the AXB-EM232 and AXP-PLV.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 29 30

Comentarios a estos manuales

Sin comentarios