AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Manual de instrucciones descargar pdf (Pagina 10)

Installation and Wiring

PT10-PLV Single Camera Pan/Tilt System

3. Mount the PosiTrack unit to a flat surface by drilling four holes, according to the mounting-

plate dimensions shown in FIG. 4. Secure the unit to the surface using four 1/4" x 20 machine

bolts and lock washers. Ensure that the external white position marker, on the pan drive hub, is

inside the desired camera rotation range.

The PT10 can be mounted to camera mounts such as the TM-CAM, WM-CAM, and PM-CAM

(Pedestal mount) as shown in FIG. 5.

FIG. 3 Center position for the camera cradle attachment (side view)

FIG. 4 Mounting-plate dimensions

Central tilt-axis

Camera cradle mounting holes

Camera points this way

Position markers, located on the outer surfaces, mark

the center for the vertical range of camera motion.

Pan Hub (mounting-plate)

Tilt Hub

3.00" BHC

(76.20mm)

3.45"

(87.7 mm)

Position marker

(on the outer surface)

Camera points this way when the pan drive is in the center

of it's range of motion (Home position).

3.453" (87.7 mm)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sin comentarios

AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Manual de instrucciones Pagina 10