AMX RPMLoader Manual de usuario descargar pdf (Pagina 9)

Configuring the NXB-CCG

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

Adding Devices

Each lighting device (keypads, sensor and switches and dimmers) in your RPM project must be added to the device list

on the NXB-CCG, via the NXB-CCG’s WebConsole (Settings page). The devices settings made in the NXB-CCG’s

WebConsole must match the device settings indicated in the RPM project report.

Supported RPM Clear Connect Lighting Controls

The NXB-CCG supports a specific set of RPM lighting controls:

Adding a Clear Connect Wall Keypad

RPM supports the CCD-W6BRL Clear Connect Wall Keypad. This keypad features six pushbuttons with status LEDs,

and two ramping (Raise/Lower) buttons (FIG. 9):

Before adding devices, generate the RPM project report (in RPM, click View Report)

and keep it handy for reference.

Supported Clear Connect Lighting Controls

Keypad: CCD-W6BRL-WH, Clear Connect Wall Keypad - 6 button with Raise/Lower (FG2606-61-WH)

Note: See Adding a Clear Connect Wall Keypad on page 5.

Occupancy Sensor: CCD-OCRB-P-WH, Clear Connect Radio Powr Savr™ Ceiling Mount Occupancy/Vacancy

Sensor (FG2606-41-WH)

Note: See Adding a Clear Connect Occupancy Sensor on page 7.

Dimmers: • CCD-F6AN-DV-WH, Clear Connect 6A Fluorescent Dimmer (FG2606-12-WH)

• CCD-RD-WH, Clear Connect 120V Accessory Dimmer (FG2606-31-WH)

• CCD-6NA-WH Clear Connect Phase Adaptive Dimmer (FG2606-13-WH)

• CCD-6D-WH, Clear Connect 600W Incandescent/MLV Dimmer (FG2606-11-WH)

Note: See Adding a Dimmer on page 9.

Switches: • CCD-RS-WH, Clear Connect 120V Accessory Switch (FG2606-32-WH)

• CCD-RS-277-WH, Clear Connect 277V Accessory Switch (FG2606-33-WH)

• CCD-15APS-1-WH, Clear Connect Switching Plug in Device - 15 A Softswitch (FG2606-51-

WH)

• CCD-8S-WH, Clear Connect 120/277V Switch (FG2606-21-WH)

Note: See Adding a Switch on page 11.

FIG. 9

CCD-W6BRL Clear Connect Wall Keypad

Status LEDs

Pushbuttons (1-6)

Ramping buttons

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Sin comentarios

AMX RPMLoader Manual de usuario Pagina 9