AMX RPMLoader Manual de usuario descargar pdf (Pagina 17)

Programming the NXB-CCG (for Clear Connect Dimmers and Switches)

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

Programming the NXB-CCG (for Clear Connect

Dimmers and Switches)

Overview

RPM Projects that include a NXB-CCG (Clear Connect Gateway) use six Lighting Scenes. In RPM, the pre-configured

Lighting Scenes are indicated in the Devices > Lighting Configuration page (FIG. 41):

Note that Lighting Scenes are essentially dim level settings: 0%-All Off, 20%, 40%, 60%, 80% and 100% (All On).

These Lighting Scenes must be programmed on the NXB-CCG. This configuration determines how the six Lighting

buttons on the RPM-generated touch panel will function.

FIG. 42 provides an example of an RPM-generated Touch Panel showing the six Lighting Control buttons:

These six RPM Lighting Scenes are also indicated in the RPM Project Report (FIG. 43):

FIG. 41 RPM - Devices > Lighting Configuration page

FIG. 42 RPM-generated Touch Panel (Lighting Control buttons)

FIG. 43 RPM Project Report - NXB-CCG device page (indicating six "Lighting Scenes")

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Sin comentarios

AMX RPMLoader Manual de usuario Pagina 17