AMX RPMLoader Manual de usuario descargar pdf (Pagina 28)

Programming the CCD-OCRB-P (-WH) Clear Connect Occupancy Sensor

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

2. In the Occupied Action Details page, click Add Device to open the Add Devices To Button popup (FIG. 63):

3. Select Dimmer to add a dim level setting to the Occupied Action.

4. Click Add to add the Dimmer to Button 1. This action closes the popup and adds the Dimmer Programming table

to the Occupied Action Details page (FIG. 64):

The Dimmer Programming table consists of four columns:

5. Click in the Level cell to edit the Level value (FIG. 65) .

FIG. 62 NXB-CCG WebConsole - Occupancy (Sensor): Occupied Action Details page

FIG. 63 Add Devices To Button popup

FIG. 64 Occupied Action Details - Dimmer Programming table

• Device Name: The name of the device (Dimmer). The Device Name is read-only.

• Level: This is the dim level setting for this action. By default, Level is set to 100%. Click inside this cell

to edit.

• Fade: This is the fade time for this action (in seconds). By default, Fade is set to 2 seconds.

• Remove: Click to remove the Dimmer from this action.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

AMX RPMLoader Manual de usuario Pagina 28