AMX RPMLoader Manual de usuario descargar pdf (Pagina 11)

Configuring the NXB-CCG

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

6. Change the ID for this keypad to match the Integration ID indicated in the RPM Project report.

FIG. 16 provides an example RPM Report entry for the CCD-W6BRL Keypad, indicating that the keypad’s

Integration ID is "10":

In this case, the ID in the WebConsole must be changed from the default value of 2 to match the Integration ID

value (10):

a. Click in the ID cell of the keypad to open an edit window (FIG. 17):

b. Enter the Integration ID that is indicated for the keypad in the RPM Project report.

c. Press Save to assign the new ID.

Adding a Clear Connect Occupancy Sensor

RPM supports the CCD-OCRB-P (-WH) Ceiling Mount Occupancy Sensor (FIG. 18):

FIG. 15 NXB-CCG WebConsole - "Keypad" added

FIG. 16 RPM Project Report - CCD-W6BRL Keypad

FIG. 17 NXB-CCG WebConsole - Device ID popup (Keypad)

FIG. 18 CCD-OCRB-P (-WH) Ceiling Mount Occupancy Sensor

Lights Off button

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

AMX RPMLoader Manual de usuario Pagina 11