AMX AXB-232 Plus plus Manual de usuario descargar pdf (Pagina 15)

OFPC Project No. 703-039 M.D. ANDERSON CANCER CENTER

Ambulatory Clinical Building

55050.00

AV BID AUDIO VISUAL SYSTEM

03/11/04 11738 -15

wires from each outlet are isolated from conduit, neutrals, and each other, and are each “home-run”

back to the dedicated breaker panel for AV systems.

B. Equipment Rack (RK-1 & RK-2) – Middle Atlantic model 5-14 with 14 rack units (quantity: 2) 19” wide x

20” deep metal equipment rack with model 5WL locking casters. Racks to be positioned inside millwork

with wiring slack as necessary to allow rack movement outside millwork for service. Provide new, and

install as shown in drawings. Provide a shelf for any device for which rack mount kit is not available.

Provide and install new blank and vent panels to match equipment rack.

C. RGBHV / Stereo Audio Matrix Switcher (VSW-4) – Extron Crosspoint 168 HVA (quantity: 1) 16x8

RGBHV, composite video and stereo audio matrix switcher with RS232 control capabilities. Switcher to

have a minimum bandwidth of 200 MHz. (-3dB) fully loaded. Install with in AV Rack RK-8 and integrate

into system as shown in drawings.

D. S-VHS VCR (VCR-1) - JVC SR-V10U S-VHS VCR. Provide with rack mount kit. Install in AV Rack, and

integrate into system as shown in drawings.

E. (Intentionally Left Blank)

F. Scan Converter (SCV-1) Extron VSC 500 scan converter (quantity: 1). Provide new, install in AV rack,

and integrate into system as shown in drawings.

G. (Intentionally Left Blank)

H. (Intentionally Left Blank)

I. Integrated Control System (CSM-3) – AMX NI-4000 integrated controller with additional RS-232 card

(quantity: 1) and PSN6.5 power supply (quantity: 1). Provide additional AMX PSN6.5 power supply to

power field interface boxes via AXLINK such as Extron IPL series. Also provide control for Lutron house

lighting system. Provide power sensors for any equipment without true 2-way RS-232. Owner and AV

Contractor to coordinate all touch panel layouts . AV Contractor to provide all source code. AV

Contractor to provide to Owner all files, program blocks and other related files used to develop control

program. AV Contractor to provide final loaded control program on CD-R disk and printed format.

Include screen layout and menu branching drawings in submittals. AMX to provide all software

programming, including onsite. Refer to AMX Master Quote #M40031. Owner to provide a copy of

standard Touch Panel pages for reference. AV Contractor to provide all source code. AV Contractor to

provide web-control using AMX NetLinx controller internal web interface. Provide web-control for each

Touch Panel in AV system. Include page tracking between Touch Panel and web-control panel. Also

include in submittals a detailed one-line diagram of control system network configuration showing all

interface boxes, power supplies, Ethernet hubs etc. Provide new and install with rack mount kit in AV

Racks and integrate into system as shown in drawings.

Control system to include the following functions:

Each 3-chip video camera at front of room on side of plasma screen (CAM-1) to have a minimum of 16

presets programmed, including preset shots of 6 participant microphone positions. Typical operation

mode will be participant microphone positions will launch presets via activation of audience microphone

(M). Sense from these microphones to be wired to AMX IO cards to activate preset, and verify active

microphones via Gentner XAP system. Manual mode to be activated via password-protected technical

touch panel page.

J. (Intentionally Left Blank)

K. (Intentionally Left Blank)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Comentarios a estos manuales

Sin comentarios

AMX AXB-232 Plus plus Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXB-232 Plus plus