AMX AXB-232 Plus plus Manual de usuario descargar pdf (Pagina 10)

OFPC Project No. 703-039 M.D. ANDERSON CANCER CENTER

Ambulatory Clinical Building

55050.00

AV BID AUDIO VISUAL SYSTEM

03/11/04 11738 -10

D. Interconnect Wiring – Provide and install following cable as required for connections in all areas. Meet

provisions of N.E.C.

Audio Plenum Rated Cable: West Penn 25452, West Penn 25291, or similar.

Composite Video Plenum Rated Cable: West Penn 25806

RGBHV Plenum Rated Cable: West Penn 258195 or Belden 1826A or Liberty RGB5C-SD-PLN.

Control Plenum Rated Cable: West Penn D25350

Control CAT5E Plenum Rated Cable: West Penn 254245

Loudspeaker plenum cable: West Penn 25226

2.4 FIELD PRODUCTS – CLASSROOM LEARNING 1.2345

A. Floor Boxes (FB-3, FB-4, FB-6) – Three FSR FL-640P-B-6 floor pocket assemblies provided and

installed by Electrical Contractor. Electrical Contractor will also provide and install one electrical power

outlet within each of these Floor Pockets. Provide custom insert plates for each Floor Pocket (quantity:

2 plate each in Floor Pocket, 6 total plates) with low-voltage connectors and engraving as shown in

drawings. Provide all low-voltage wiring, and install insert plates as shown in drawings.

B. (Intentionally Left Blank)

C. (Intentionally Left Blank)

D. (Intentionally Left Blank)

E. Front Projection Screen (SC-3) (OFOI) Draper Rollaramic 16’ x 9’ electric projection screen with matte

white surface with 3’ extra drop at top with low voltage control (By Others) (quantity: 1. Integrate into

control system as shown in drawings.

F. Rear Projection Screen (OFOI) – Draper Cine10NG 16”0” x 6”0”rear projection screen with system 300

frame with coated side facing the audience.

G. (Intentionally Left Blank)

H. Video Camera and Pan/Tilt Unit (CAM-3) - Sony DXC-990 video camera with Canon YH19x6.7 KTS 19x

zoom lens, with AMX AXB-PT15 pan/tilt assembly with servo camera power option (quantity: 2). Mount

video camera and pan tilt to vertical surface in rear cove with Peerless CS9W mount (quantity: 2). Dress

all cables neatly from interface plate to camera assemblies. Also provide Sony CMA-D2 camera power

supply (quantity: 2), Sony CCMC-02 cable (quantity: 2), and AMX CC-CAM lens control cable (quantity:

2), and CC-CAM RS-232 control cable (quantity: 2). Provide Dataprobe iboot Ethernet controllable

power switch (EPS-1) (quantity: 1). Provide new and integrate into system as shown in drawings.

I. Remote Video Camera, Lens, and Pan/Tilt Unit (CAM-4) – Sony DXC-990 video camera with Canon

YH19x6.7 KTS 19x zoom lens, with AMX AXB-PT15 pan/tilt assembly with servo camera power option

(quantity: 1). Also provide Sony CMA-D2 camera power supply (quantity: 1), Sony CCMC-02 cable

(quantity: 1), and AMX CC-CAM lens control cable (quantity: 1), and CC-CAM RS-232 control cable

(quantity: 1). Mount PTZ assembly to wall with AMX WM-CAM mount (quantity: 1). Provide Dataprobe

iboot Ethernet controllable power switch (quantity: 1). Provide new and integrate into system as shown

in drawings.

J. Loudspeakers (LS-1, LS-2, LS-3, LS-4, LS-5 and LS-6) – Renkus Heinz TRX121/9 full-range

loudspeakers (quantity: 6), each with screw terminal input connections, and appropriate mounting

hardware. Include necessary rigging and hanging hardware to suspend loudspeakers (from planned

building structure) at locations as shown in drawings. As necessary, coordinate and install hanging

hardware from available structure well before completion of ceiling. Mount according to table below.

Indicate hanging and rigging details in shop drawings. Mount loudspeakers above finished ceiling plane

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Comentarios a estos manuales

Sin comentarios

AMX AXB-232 Plus plus Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXB-232 Plus plus