AMX AXP-CPI16 Manual de usuario descargar pdf (Pagina 30)

central controllers

3813000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993

NXP-CPI16

NetLinx

Custom Panel Interface

(FG2410)

OVERVIEW

The NetLinx Custom Panel Interface provides a direct ICSNet

connectiontocustomcontrolpanels.It’spin-for-pincompatible

withdevicesthatweredesignedforusewiththeAXP-CPI16card

(designedforintegrationwithanAxcessControlSystem).Two20-

pin headers provide ribbon cable wiring or direct-connect inser-

tiontocircuitboards,providinginputsforupto16closuresand

16feedbackoutputsforLEDs.Undersoftwarecontrol,theLED

outputscanactasdriversto8-segmentbargraphsorasdiscrete

outputsforfeedback.Inaddition,theNXC-CPI16alsoincludes

two quadrature inputs for mechanical or optical rotary encoders,

used to control variable levels such as volume and lights, or lens

focusandzoom.

COMMON APPLICATION

TheNXP-CPI16isaversatile,usefuldeviceforbothcustompanel

and contact-closure applications.

FEATURES

•Integratescustompanelswith16closureinputsand16LED

outputs; pin-for-pin compatible with panels designed for

 AXP-CPI16

•Operatesasalow-costclosureinterface

•Actsasadriverforuptotwo8-segmentLEDbargraphs;each

 bargraphuseseightofthe16LEDoutputs

•Allowsprecisedigitalcontrolofuptotwolevelsfrom

quadrature inputs

•Acceptsmechanicaloropticalrotaryencoders

•

Offersprogrammablelevelresponse,providessoftware-driven

 performanceadjustmentandswitchablecoarse/nelevelcontrol

SPECIFICATIONS

DIMENSIONS (HWD)

2 3/4” x 1 7/8” x 1 3/8” (7.0 cm x 4.7 cm x 3.6 cm)

WEIGHT

• Device: 8.10 oz (229.6 g)

• Total Shipping: 1 lb (453.6 g)

POWER

12 VDC; maximum draw of 300 mA

INPUT CONNECTORS

• Indicator power: Two-pin 3.5 mm captive wire

• I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs

activated with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28 VDC).

Inputs are sampled approximately every 10 msec

• Rotary Encoder inputs: 2 Quadrature inputs on a 2 x 3 header (6-pin), two

encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and

a GND pin

ICSNET

• Two RJ-45 connectors for ICSNet connection ID BUTTON

• Generates an event from the CPI16 to allow you to assign new device numbers

using the ID mode in NetLinx Studio

LED

ICSP status indicator (green)

OPEN COLLECTOR OUTPUTS

• 16-open collector outputs, acting as a switch to ground, up to 100 mA.

• Outputs can be connected to voltages ranging between 0 and + 28 V.

• Each output is updated every 10 msec

INCLUDED ACCESSORIES

• 6-pin header with 3 feet (0.914) of ribbon cable

• Two mating 20-pin headers, each with 3 feet of ribbon cable attached

• One green 2-pin 3.5 mm pitch captive wire connector for external

indicator power

1 2 ... 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

AMX AXP-CPI16 Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXP-CPI16