AMX AXP-CPI16 Manual de usuario descargar pdf (Pagina 24)

central controllers

3753000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993

OVERVIEW

Now Enables AMX Control Of KNX Devices

TheNetLinxNXB-KNXCommunicationsGatewayallowsNetLinx

Integrated Controllers the ability to seamlessly control, integrate

andcommunicatewithhomesandbuildingsthatutilizethe

KNXcommunicationprotocol.KNXistheworld’srstopen,

royalty free, and platform independent standard for home and

commercial building control.

COMMON APPLICATION

Ideal for building control, ranging from lighting and shade

controltovarioussecuritysystems,HVAC,watercontrol,energy

management, metering as well as audio and more.

FEATURES

•Indexlteringtablesforportabilitybetweensystems

•Zerocongurationsupportforimmediatesystemrecognition

•Two-WayControl

•Extenddata-pointtypeallowstime,date,etc.tobecaptured

and used in RMS

•64MBRAM/256MBFLASH

•EthernetInterfacetoAMXcontrolequipment

NXB-KNX

KNX Communications Gateway

(FG2031-01)

SPECIFICATIONS

DIMENSIONS (HWD)

• With feet: 1 5/8” x 5 1/2” x 4 1/8” (4.2 cm x 14.1 cm x 10.4 cm)

• Without feet: 1 1/2” x 5 1/2” x 4 1/8” (3.9 cm x 14.1 cm x 10.4 cm)

• RU: 1

WEIGHT

1.45 lbs (0.65 kg)

FRONT PANEL COMPONENTS

• Status LED (green): Blinks once a second to indicate that the unit has powered

up. Any state other than blinking once a second indicates the unit is either not

powered, or has not completed boot up

• KNX LED (green): Solid on indicates power is on and the unit is connected to

KNX bus

• Output LED (red): Lights to indicate trafc from the NXB-KNX to the KNX bus

• Input LED (yellow): Lights to indicate trafc from the KNX bus to the NXB-KNX

REAR PANEL CONNECTORS

• KNX 2-pin captive-wire connector

• Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication activity,

connection status, speeds, and mode information:

- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps

and turns Off when the speed is 10 Mbps

- L/A (link/activity) - Green LED lights On when the Ethernet cables are

connected and terminated correctly, and blinks when receiving Ethernet

data packets

POWER

• PoE powered - no local Power Supply needed

• IEEE 802.3af Compliant

MEMORY

• 64 MB of RAM

• 256 MB of FLASH

ENVIRONMENTAL

• Operating Temperature: 32°F to 104°F (0°C to 40°C)

• Relative Humidity: 5% to 85% non-condensing

• Intended for indoor use only

CERTIFICATIONS

FCC Class B, CE, IEC60950, RoHS

INCLUDED ACCESSORIES

• Rubber feet

• Green 2-Pin 5mm Phoenix connector with captive screws

RECOMMENDED ACCESSORIES DESCRIPTION PART # PAGE #

PS-POE-AF PoE Injector (FG423-80) 416

A CLOSER LOOK

Device Status LEDs

2-pin captive-wire connector for

control interface

PoE Ethernet Port for

network data/power

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

AMX AXP-CPI16 Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXP-CPI16