AMX AXP-CPI16 Manual de usuario descargar pdf (Pagina 19)

370 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com

nI-3101-sIG central controllers

SPECIFICATIONS

DIMENSIONS (HWD)

• 2” x 17” x 10” (5.1 cm x 43.2 cm x 25.4 cm)

• RU: 1

WEIGHT

6.95 lbs (3.15 kg)

POWER

900 mA @ 12 VDC

ENCLOSURE

Metal with black matte nish and translucent polycarbonate faceplate

ONBOARD MASTER

Processing Power: 32-bit microprocessor, 404 MIPS, Real-time operating system

Memory: Volatile – 64 MB, Non-Volatile – 1 MB, Flash – 256 MB

Networking:

• AxLink – 4-wire network (20.8 kbps) connects up to 255 Axcess devices,

operates up to 3,000 feet of wiring and supplies 12 VDC power

• Ethernet – Direct 10/100 BaseT Ethernet networking

Ethernet Protocols used by NI-3101-SIG

• ICSP – peer to peer protocol used for both master-to-master and

master-to-device communications

• ICMP – To connect over a network, ping a NI-3101-SIG

• Telnet – NetLinx telnet server provides a mechanism to congure and diagnose

a NetLinx system

• HTTP – NI-3101-SIG has a built-in web server that complies with the HTTP 1.0

specication and supports all of the required features of HTTP v1.1

• FTP – NI-3101-SIG has a built-in FTP server that conforms to RFC

•

integration! Solutions – uses port 10500 for XML based communication protocol

CONTROL PORTS

• Six Serial data control ports (RS-232/422/485), with XON/XOFF and CTS/RTS,

300-115,200 baud

• Eight IR/Serial ports for control of up to 1.142 MHz carrier frequency

• Eight I/O channels for contact closure, 0-5 VDC voltage sensing, or interactive

power sensing for IR ports

• Eight Relays - single-pole single-throw relay ports, independently controlled

FRONT PANEL COMPONENTS:

LED INDICATORS

• LNK/ACT: Blue LED lights when the Ethernet cables are connected and

terminated correctly and blinks when receiving Ethernet data packets

• Status: Blue LED blinks to indicate that the system is programmed and

communicating properly

• Output: Blue LED blinks when the Master transmits data, sets channels on

and off, sends data strings, etc.

• Input: White LED blinks when the Master receives data from button pushes,

strings, commands, channel levels, etc.

RS-232/422/485 LEDS

• Six sets of blue and white LEDs light to indicate Ports 1-6 are transmitting

or receiving RS-232, 422, or 485 data

• TX LEDs (blue) blink when transmitting data

• RX LEDs (white) blink when receiving data

RELAY LEDS

Eight blue LEDs light to indicate relay channels 1-8 are active (closed) on Port 8

IR/SERIAL LEDS

Eight blue LEDs light to indicate the IR/Serial ports 9-16 are transmitting

control data

I/O LEDS

Eight white LEDs light when the I/O channels 1-8 are active on Port 17

REAR PANEL COMPONENTS

POWER CONNECTOR

2-pin (male) green captive-wire connector for 12 VDC power supply

ETHERNET 10/100 PORT

RJ-45 Ethernet 10/100 connector. Automatically negotiates connection speed

and whether to use half or full duplex mode

AXLINK CONNECTOR

Black 4-pin (male) captive-wire connector that provides data and power to

external control devices (6 A max power rating)

PROGRAM PORT

USB connector that supports USB communications to a PC for system

programming and diagnostics

CONFIGURATION DIP SWITCH

4-position DIP switch

ID BUTTON

Pushbutton sets device address ID (in conjunction with NetLinx Studio v1.2 build

200 or higher software program)

RS-232/422/485: (PORTS 1-6)

Six RS-232/422/485 control ports using DB-9 (male) connectors with XON/

XOFF (transmit on/transmit off), CTS/ RTS (clear to send/ready to send), and

300-115,200 baud

RELAYS (PORT 8)

• 8-channel single-pole single throw relay ports

• Each relay is independently controlled

• Supports up to 8 independent external relay devices

• Each relay can switch up to 24 VDC or 28 VAC @ 1 A

• Two 8-pin mini-Phoenix connectors (3.5 mm) provide relay termination

DIGITAL I/O (PORT 17)

• 8-channel binary I/O port for contact closure

• Each input is capable of 0-5 VDC voltage sensing. Input format is software

selectable

• One 10-pin mini-Phoenix connector (3.5 mm) provide I/O port termination

IR/SERIAL (PORTS 9-16)

• Eight IR/Serial control ports support high-frequency carriers up to 1.142 MHz

• Each output is capable of two electrical formats: IR or Serial

• Eight IR/Serial data signals can be generated simultaneously

•

Two 8-pin mini-Phoenix connectors (3.5 mm) provide IR/ Serial port termination

ENVIRONMENTAL

• Operating Temperature: O° C (32° F) to 50° C (122° F)

• Operating Humidity: 20% to 85% RH

• Heat Dissipation (Typical): 36.9 BTU/hr

INCLUDED ACCESSORIES

• Removable rack ears allow for tabletop, under-counter, and front/rear

rack mounting

• Removable feet give a nished look and provide spacing between stacked

components

• Two 8-pin mini-Phoenix female connectors (41-5083)

• One 10-pin mini-Phoenix female connector (41-5107)

• Two CC-NIRC IR Emitters (FG10-000-11)

• One 4-pin 3.5 mm mini-Phoenix AxLink connector (41-5047)

• One 2-pin mini-Phoenix PWR connector (41-5025)

• One Relay Terminal Common Strip (41-2105-01)

• Four Rack mount screws (80-0186)

• Four washers (80-0342)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comentarios a estos manuales

Sin comentarios

AMX AXP-CPI16 Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXP-CPI16