AMX AXP-CPI16 Manual de usuario descargar pdf (Pagina 22)

3733000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993

RECOMMENDED ACCESSORIES DESCRIPTION PART # PAGE #

PSN6.5 6.5 Amp Power Supply (FG423-41) 415

PSN4.4 4.4 Amp Power Supply (FG423-45) 414

NXA-CF2NI CompactFlash Upgrade for NI Series Controllers (FG21116-xx) 382

SPECIFICATIONS

DIMENSIONS (HWD)

• 5 3/16” x 17” x 9 5/16” (13.2 cm x 43.2 cm x 23.7 cm)

• RU: 3

WEIGHT

9.15 lbs (4.15 kg)

POWER

900 mA @ 12 VDC

ENCLOSURE

Metal with black matte ﬁnish

MEMORY

• 64 MB SDRAM (FG2105-06)

• 256 MB RAM (FG2105-26)

• 1 MB of Non-volatile SRAM

COMPACT FLASH

2 GB Compact Flash (upgradeable to 4 GB factory programmed)

ONBOARD MASTER

404 MIPS

CERTIFICATIONS

FCC Part 15 Class B, CE, and IEC 60950

FRONT PANEL COMPONENTS

• LINK/ACT: Green LED blinks when the Ethernet cables are connected and

terminated correctly. Also blinks when receiving Ethernet data packets

• Status: Green LED blinks to indicate that the system is programmed and

communicating properly

• Output: Red LED blinks when the Controller transmits data, sets channels,

sends data strings, etc.

• Input: Yellow LED blinks when the Controller receives data from button pushes,

strings, commands, channel levels, etc.

• RS-232/422/485 LEDs

• Relay LEDs

• IR/Serial LED

• I/O LEDs

• NetLinx Control Card Slot 1 - 4

• Rack-mount brackets: Provides an installation option for the Integrated

Controller to be mounted into an equipment rack, when used with the

Installation Kit (KA2105-01)

REAR PANEL CONNECTORS

• RS-232/422/485 (Ports 1 - 7)

• ICSNet: Two RJ-45 connectors for ICSNet interface (included)

• ICSHub Out: RJ-45 connector provides data to a Hub connected to the

Controller (included)

• Relay (Port 8)

• Digital I/O (Port 17)

• IR/Serial (Ports 9 - 16)

• Program Port

• Conguration DIP Switch: Sets the communication parameters for the

Program port

• ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device

• Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show

communication activity, connection status, speeds, and mode information:

- SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps

and turns Off when the speed is 10 Mbps.

- L/A (link/activity) - Green LED lights On when the Ethernet cables are

connected and terminated correctly, and blinks when receiving Ethernet

data packets.

• AxLink LED: Green LED indicates the state of the AxLink port

• AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data

and power to external control devices

• Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector

• CardFrame Number DIP Switch

ENVIRONMENTAL

• Operating Temperature: O° C (32° F) to 50° C (122° F)

• Operating Humidity: 20% to 85% RH

• Heat Dissipation (Typical): 36.9 BTU/hr

INCLUDED ACCESSORIES

• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)

• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)

• 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)

• Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)

• Two CC-NIRC IR Emitters

• Two removable rack ears (62-2105-07)

nI-4100 central controllers

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comentarios a estos manuales

Sin comentarios

AMX AXP-CPI16 Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXP-CPI16