AMX TPI-PRO-2 Especificaciones descargar pdf (Pagina 17)

Cable Details and Pinout Information

TPI-PRO (Total Presentation Interface)

Cable Details and Pinout Information

Overview

The VIDEO/VGA Input connectors on the rear panel are used to connect source input devices to the TPI-PRO

(FIG. 3). The TPI-PRO routes video from connected source input devices to the connected output devices.

Each connector supports VGA, S-video, Composite and Component inputs.

In order to connect non-VGA input source devices (S-Video, Composite and Component) to the VIDEO/VGA

Input connectors, the following (optional) adapter cables are required:

VGA-to-Component (RGB)/Composite Cable Pinout Information

The following table lists the pinout configuration for HD-15 connector to Component (RGB) or

Composite connectors:

FIG. 3 VIDEO/VGA Inputs

Input Adapter Cables

Name Description Length FG#

• CC-HD15M-RCAM3 HD-15 to 3x Male RCA Connectors 6’ (1.828m) FG10-2170-03

• CC-HD15M-HD15M HD-15 Male to HD-15 Male Connector 6’ (1.828m) FG10-2170-01

• CC-HD15M-SVIDM HD-15 Male to S-Video Male Connector 6’ (1.828m) FG10-2170-04

VGA IN to Component (RGB) or Composite Pinouts

VGA Pin VGA Signal Component Signal Red RCA Green RCA Blue RCA

1 Red Pr signal center pin

2 Green Y signal center pin

3 Blue Pb signal center pin

4N/C

5GND

6 RAGND Pr - Return shield

7 GAGND Y - Return shield

8 BAGND Pb - Return shield

9+5VDC

10 SAGND

11 N/A

12 DDC_SDA

13 HSYNC

14 VSYNC

15 DDC_SDL

Input 4

Note: The TPI-PRO-4 (shown here) has four VIDEO/VGA Inputs, the TPI-PRO-2 has two Inputs

Input 3 Input 2 Input 1

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 193 194

Sin comentarios

AMX TPI-PRO-2 Especificaciones Pagina 17