AMX RMS CODECRAFTER Guía de instalación descargar pdf (Pagina 38)

RMS Server Configuration

RMS Enterprise - Installation Guide

Note that these options are presented in the Multi-Server tab (if the RMS Server Configuration application

was launched manually).

Refer to Appendix C: Clustered Deployment on page 109 for more information.

Multi-Server Configuration Options (Cont.)

• Search Cluster

Name

Enter the name of the Search Cluster to which this server will be added.

The Search Cluster Name must be identical for all servers in the multi-server farm.

• Datagrid Cluster

Name

Enter the name of the Datagrid Cluster in which this server will participate.

The Datagrid Cluster Name must be identical for all servers in the multi-server farm.

Note: Search Cluster Name and Datagrid Cluster Name only need to be changed from their default

values in cases where two distinct RMS multi-server farms are being installed.

• Membership

Address

Enter the multicast address on which the servers will broadcast their presence and

listen for other membership broadcasts.

Note: Verify that your network is enabled for multicast traffic.

The multicast address, in conjunction with the port is what creates a cluster group. To

divide up your farm into several different groups, change the port or the address.

Default = 228.0.0.4

• Membership

Port

Enter the multicast port address.

The multicast port, in conjunction with the address is what creates a cluster group. To

divide up your farm into several different groups, change the port or the address.

Default = 45564

• Membership

Drop-Time

The membership component will time out members and notify the Channel if a mem-

ber fails to send a membership broadcast within the time-frame specified here. If a

membership broadcast is not received from a member in the specified time-frame,

the cluster will be notified.

Note: On a high latency network you may wish to increase this value, to protect

against false negatives (premature drops).

Default = 3000 (ms)

• Membership

Frequency

Enter the frequency in milliseconds in which membership broadcasts are sent out.

Changing this value simply changes the interval in between membership

broadcasts.

Default = 500 (ms)

Remote Log and Data Files

• Remote Log

Files Directory

Remote Log Files represent a compilation of log files for all servers in the RMS

installation.

Note: Log file names are prepended with the Worker Name to distinguish them from

each other.

Enter specific path information for the target directory to be used for Remote Log

Files (click the Browse buttons to navigate to the desired directory in the Choose

Your Directory dialog).

• The remote log file path should be a common shared network path that is

accessible by all RMS servers.

• This same directory path should be configured the same on each RMS server

participating in the RMS web server farm.

• Remote Data

Files Directory

All servers in the RMS installation utilize the same search index. Remote Data Files

represent a compilation of data files for all servers in the RMS installation.

Enter specific path information for the target directory to be used for Remote Data

Files (click the Browse buttons to navigate to the desired directory in the Choose

Your Directory dialog).

• The remote data file path should be a common shared network path that is

accessible by all RMS servers.

• This same directory path should be configured identically on each RMS server

participating in the RMS web server farm.

Note: If the search index is lost (due to hardware failure or file corruption), it can be

rebuilt via the Rebuild Search Index option in the RMS Enterprise UI.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 135 136

Comentarios a estos manuales

Sin comentarios

AMX RMS CODECRAFTER Guía de instalación Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Software AMX RMS CODECRAFTER