AMX NI-2000 Guía de usuario descargar pdf (Pagina 15)

Introduction

NI-2000, NI-3000, NI-4000 Hardware Reference Guide

NI-4000 Specifications

Dimensions (HWD): • 5.21" x 17.00" x 9.60" (13.23 cm x 43.18 cm x 24.27 cm)

• 3 RU (rack unit) high

Power Requirement: • 900 mA @ 12 VDC (no cards)

Memory: • 32 MB SDRAM

• 1 MB of Non-volatile Flash

Compact Flash: • 32 MB Card (upgradeable). Refer to the Other AMX Equipment section on

page 14 for more information.

Weight: • 9.15 lbs (4.15 kg)

Enclosure: • Metal with black matte finish

Certifications: • FCC Part 15 Class B and CE

Front Panel Components:

LINK/ACT • Green LED lights when the Ethernet cable is connected and an active link is

established. This LED also blinks when receiving Ethernet data packets.

Status • Green LED lights to indicate that the system is programmed and

communicating properly.

Output • Red LED lights when the Controller transmits data, sets channels On/Off,

sends data strings, etc.

Input • Yellow LED lights when the Controller receives data from button pushes,

strings, commands, channel levels, etc.

RS-232/422/485 LEDs • Seven sets of red and yellow LEDs light to indicate the rear DB9 Ports 1-7

are transmitting or receiving RS-232, 422, or 485 data:

- TX LEDs (red) light when transmitting data

- RX LEDs (yellow) light when receiving data

- LED activity reflects transmission and reception activity

Relay LEDs • Eight red LEDs light to indicate the rear relay channels 1-8 are active

(closed)

• These LEDs reflect the state of the relay on Port 8

• If the relay is engaged = LED On and if the relay is Off = LED Off

IR/Serial LEDs • Eight red LEDs light to indicate the rear IR/Serial channels 1-8 are

transmitting control data on Ports 9-16

• LED indictor for each IR port remains lit for the length of time that IR/Serial

data is being generated

I/O LEDs • Eight yellow LEDs light when the rear I/O channels 1-8 are active

• LED indicator for each I/O port reflects the state of that particular port

NetLinx Control

Card slots 1- 4

Accepts up to 4 compatible NetLinx Control Cards:

• NXC-COM2 Dual COM Port Control Card (FG2022)

• NXC-I/O10 Input/Output Control Card (FG2021)

• NXC-IRS4 4-Port IR/S Control Card (FG2023)

• NXC-REL10 Relay Control Card (FG2020)

• NXC-VAI4 Analog Voltage Control Card (FG 2025)

• NXC-VOL4 Volume Control Card (FG2024)

Rack-mount brackets • Provide an installation option for the Integrated Controller to be mounted

into an equipment rack, when used with the Installation Kit (KA2105-01).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Comentarios a estos manuales

Sin comentarios

AMX NI-2000 Guía de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Cajas De Interruptores En Serie AMX NI-2000