AMX MET-7 Especificaciones descargar pdf (Pagina 39)

Programming The Metreau Keypads

Metreau Keypads

3. Browse to the location of the firmware file.

4. Select the file within the Files frame.

5. Click Query for Devices.

6. Select the Metreau keypad within the Devices frame.

The MET-6N will appear as two devices in the Devices frame, because it’s built-in IR Receiver, is

recognized as a separate online device.

The Device Address of the IR Receiver is always one number higher than the device number of the

keypad itself (to which the firmware is uploaded).

For example, if the MET-6N is set to device number 127, then the IR Receiver on that MET-6N will

appear as device number 128. Firmware must be sent to the keypad, not the IR Receiver (in this example,

device 127).

7. Click Send and then Close.

8. Upon confirmation of a successful send, you can exit NetLinx Studio2.

Programming the SWT Metreau Keypads

SWT-only Metreau keypads (DAS-MET-6SRC and DAS-MET-NUM) are configured via options that are

accessible through the Tango Audio Controller.

Refer to the Tango Audio Controller Operation / Reference Guide (available from www.amx.com) for details.

FIG. 4 Send to Axcess Dialog Window

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Sin comentarios

AMX MET-7 Especificaciones Pagina 39