AMX MET-7 Especificaciones descargar pdf (Pagina 26)

Mounting and Installation

Metreau Keypads

Podium Mounting

Use the cutout dimension for the wallbox to cutout the Mounting Frame install surface for the keypad

2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.

3. Connect the AxLink power supply. The connector passes through the center of the Mounting Frame and

connects to the board.

4. With the Mounting Frame resting in the cutout area, drill the mounting holes into the flat surface.

Accent Frame

While the Metreau device family does fit into many International wallboxes, it may be necessary to utilize the

optional Accent Frame to completely cover the wallbox.

To install the keypad with the optional Accent Frame:

1. Use the cutout dimension for the wallbox to cut out the install surface for the keypad.

2. Place the Accent Frame on the wallbox; align the screw holes with the mounting holes on the wallplate.

Fasten the wallplate to the wallbox.

Based on the extensive number of international wallboxes it is not pragmatic to ship every possible screw

that could be used. Please use the screws appropriate for your specific wallbox.

3. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.

4. Connect the power supply. The connector passes through the center of the Mounting Frame and connects

to the board.

5. Place the Mounting Frame on the Accent Frame; align the screw holes with the mounting holes and fasten

the Mounting Frame to the wallplate. The Accent Frame is shipped with two #6-32 x .187 long flat head

screws (80-131); these are used to attach the keypad to the accent frames.

Do not overtighten the screws when mounting the Mounting Frame. The device

should be flush with mounting surface.

Do not overtighten the screws when mounting the Mounting Frame. The device

should be flush with mounting surface.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Sin comentarios

AMX MET-7 Especificaciones Pagina 26