
56 Designing Touch Panel Pages ViewPoint Wireless Touch Panels
Setting the channel code
The channel buttons that set the device and button channel codes for the touch panels
are shown in Figure 74.
1. Press DEV to open the keypad and set the device number.
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes 1
through 4 to identify the touch panel. the ViewPoint Wireless Touch Panels - Pro-
gram Reference instruction manual for detailed information.
3. Press ENTER to store the device number into memory, close the keypad, and re-
turn to the Button Properties page.
4. Press CHAN to open a keypad and enter a channel value of 1 through 255 in the
keypad. The programming software uses the channel code number to identify
the button and its’ operations.
5. Press ENTER to store the channel number into memory, close the keypad, and
return to the Button Properties page.
Setting the variable text code
The variable text buttons that set the device and button channel codes for the touch
panels are shown in Figure 75.
Note
Bargraphs only function on
VPN-CP/VPN-GS touch pan-
Figure 74
Bargraph CHANNEL code
buttons
Note
The panel does not allow you
to enter a device number
greater than the DEVICE
USED without first displaying
a decision box. This box asks
you to decide whether you
accept the new selection or
default to the previous value.
Note
The channel code for non-
active buttons is 0 and for ac-
tive buttons is 1 through 255.
Note
One-way ViewPoint touch
panels do not support variable
Figure 75
Comentarios a estos manuales