AMX Wave Wireless Accessories and Adapters none Manual de instrucciones Pagina 41
- Pagina / 124
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ViewPoint Wireless Touch Panels Designing Touch Panel Pages 35
b. For two-way ViewPoints (VPN-CP/GS), device numbers 1 through 4 can be
AMX RF. The AMX IR is not supported (38 KHz and 455 KHz) but other
manufacturer’s IR codes are supported by assigning ViewPoint device num-
bers 2, 3, and 4 for IR codes. Refer to the AXR-NWS NetWave Server instruc-
tion manual for more information on the number of controlled devices that
can be configured to work through the VPN and be controlled by the AXR-
NWS NetWave Server.
3. Press ENTER to store the device number into memory, close the keypad, and re-
turn to the Button Properties page.
4. Press CHAN to open a keypad and enter a channel value of 1 through 255 in the
keypad. The programming software uses the channel code number to identify
the button and its’ programmed operations.
5. Enter 1 through 255 in the keypad. The programming software uses the channel
code number to identify the button and its operations.
6. Press ENTER to store the channel number in memory, close the keypad, and re-
turn to the Button Properties page.
Setting the variable text code
The variable text buttons that set the device and button channel codes for the touch
panels are shown in Figure 44.
1. Press DEV to open a keypad and set the device number.
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes 1
through 4 to identify the touch panel. Refer to the ViewPoint Wireless Touch Panels
- Program Reference instruction manual for detailed information.
3. Press ENTER to store the device number in memory, close the keypad, and re-
turn to the Button Properties page.
4. Press CHAN to open a keypad and set the channel number.
Note
If DEVICE USED is set to 4
and Base Device Number is
128, the Controller recognizes
bus devices 128
-
131.
Note
The channel code for non-
active buttons is 0 and for ac-
tive buttons is 1 through 255.
Note
One-way ViewPoints do not
support bargraphs, sliders,
joysticks, VGA, or video.
Figure 44
VAR TEXT code button
Note
The panel does not allow you
to enter a device number
greater than the DEVICE
USED without first displaying
a decision box. This box asks
you to decide whether you
accept the new selection or
default to the previous value.
- 9LHZ3RLQW# 1
- Table of Contents 3
- Introduction 7
- Product Pics and Specs 11
- Specifications 12
- Figure 3 12
- Figure 4 13
- Battery Specifications 14
- ViewPort specifications 15
- Figure 7 15
- Connections, Cleaning, and 17
- Charging 17
- Figure 9 18
- 1. Turn the ViewPoint Off 19
- Figure 10 20
- Figure 11 21
- Figure 12 22
- Touch Panel Basics 23
- Figure 14 24
- Figure 15 25
- Figure 16 25
- Figure 17 25
- Figure 18 26
- Figure 19 26
- Figure 20 26
- Figure 21 26
- Touch to Continue buttons 27
- Designing Touch Panel Pages 29
- Figure 24 30
- Figure 25 30
- Figure 26 31
- Figure 27 32
- Figure 28 32
- Figure 29 33
- Figure 30 33
- PAGE menu 34
- Figure 32 35
- Figure 33 35
- Figure 34 36
- Figure 35 36
- Figure 36 37
- Figure 37 37
- Figure 38 37
- Button Types menu 39
- Figure 42 40
- Figure 43 40
- Figure 44 41
- Figure 45 42
- Figure 46 42
- Figure 47 43
- Figure 48 43
- Figure 49 43
- TEXT/IMAGE operation bar 44
- Figure 51 45
- Figure 52 46
- BITMAPS menu example 47
- Sample Download To Panel 48
- Figure 55 49
- Figure 56 49
- Variables: 51
- Figure 57 51
- Example: $W 455<CR> 52
- Figure 58 52
- ∧ Channel up ∧ 53
- ∨ Channel down ∨ 53
- Figure 60 55
- Figure 61 55
- Figure 62 55
- Figure 63 56
- Figure 66 58
- Figure 67 58
- Figure 70 60
- Figure 71 60
- Figure 72 61
- Figure 73 61
- Figure 76 63
- Figure 77 64
- Figure 78 64
- Figure 79 65
- Figure 80 65
- Figure 81 66
- Figure 82 66
- Figure 83 66
- Figure 84 67
- Figure 85 67
- Figure 86 68
- Figure 87 68
- 3URJUDPPLQJ# 71
- Affected Send_Commands 72
- Figure 89 72
- System Send_Commands 75
- Command Description 79
- Activate page tracking 79
- Example: 79
- Figure 92 82
- Figure 93 82
- Macro Commands 101
- Figure 100 101
- Loading Infrared (IR) Files 103
- (Figure 103) 104
- Figure 104 105
- Figure 105 105
- 6. Then, press F10 106
- Figure 108 107
- Figure 109 107
- F1 and choose 107
- Figure 110 108
- Figure 111 108
- Enter Device Number 109
- Device reports 110
- Upgrading the Firmware 111
- Figure 116 113
- Support 115
- Panja International Offices 116
- Figure 119 116
- Technical Support Contacts 117
- Figure 120 117
- 800/222-0193 124
© 2020, manymanuals.es. Todos los derechos reservados | 0.125 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales