AMX Wave Wireless Accessories and Adapters none Manual de instrucciones Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 124
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
ViewPoint Wireless Touch Panels Connections, Cleaning, and Charging 13
The VPN-CP/VPN-GS operates on 2.4 GHz for two-way RF communications with
the AXR-NWS NetWave Server. It also provides one-way IR using other manufactur-
ers IR codes.
If you plan to use multiple one-way ViewPoints within the same locals, it is strongly
recommended that each unit be ordered for operation on different RF frequencies.
This will prevent erroneous data being received by the respective Controller.
Cleaning the Touch Overlay
You should clean the touch screen overlay after each day’s use. Materials required
are:
Two clean, soft texture cotton cloths
Spray bottle of cleaning solution consisting of 50% isopropyl alcohol and
50% water.
1. Turn the ViewPoint Off.
2. Spray a small amount of the cleaning solution onto one of the cloths.
3. Clean the touch panel overlay with the damp cloth.
4. Wipe the touch panel overlay with the dry cloth.
ViewPoint Rechargeable Battery
The ViewPoint requires use of a VPA-BP ViewPoint Rechargeable Battery. Figure 10
shows the VPA-BP and placement in the ViewPoint.
Note
The two-way ViewPoints do
not support AMX IR codes
(38 KHz and 455 KHz) but do
support other manufacturers
IR codes. The one-way View-
Points support all IR codes.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 123 124

Comentarios a estos manuales

Sin comentarios