AMX NXB-CCG-K Información técnica descargar pdf (Pagina 21)

Lutron® integration protocol

Connection Information

Provides an RS232 and Ethernet connection to communicate with external equipment. Communication is

through either RS232 or Ethernet, but not both simultaneously.

RS232

The RS232 connection has the following communication settings:

•

Baud Rate 9600/19200/38400/115200 (set via dipswitch on unit)

•

8 data bits

•

No parity bit

•

1 stop bit

•

No ﬂow control

Ethernet

Conﬁguring the control interface to communicate over a network takes not only knowledge of the QS

system, but of networking as well. Installers with limited networking knowledge are advised to contact a

networking professional before attempting to connect a QSE-CI-NWK-E through a network. The information

below will help an installer communicate the QSE-CI-NWK-E conﬁgurations to a network professional.

The installer will make any necessary changes to the control interface using the LutronR DeviceIP or PC

software tool and the network professional can make any necessary changes to the networking equipment.

Single Ethernet Port

•

IEEER 802.3 Auto-Sensing 10BaseT / 100BaseTX

•

Supports MDI/MDIX auto-crossover (no crossover cable needed).

•

Female 8P8C “Computer RJ-45” socket

•

Green "Connect" LED, Amber "Activity" LED

•

Use Cat 5 cabling or better

TCP / IP Settings

•

IP Address: <static default = 192.168.250.1>

•

Subnet Mask: < static default = 255.255.255.0>

•

Gateway: <static default = 0.0.0.0>

Protocols Used for Integration

•

TELNET

Telnet Server

•

Used by third party equipment (i.e. touch screen)

•

Limited to transferring ASCII characters

•

Telnet Port number is 23

•

QS Standalone Integration

Access Points (continued)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 136 137

Comentarios a estos manuales

Sin comentarios

AMX NXB-CCG-K Información técnica Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AMX NXB-CCG-K