AMX AXT-CV10 Especificaciones descargar pdf (Pagina 21)

CV10 Touch Panel Accessories

10" Modero Widescreen Touch Panels

The 3 wires used in a typical XLR lead are often referred to as Ground, Live (Hot) and Return (Cold).

"Live" and "Return" carry the "in-phase" and "out-of-phase" versions of the audio respectively. The pins

of the XLR plug/socket are as follows:

When connecting the MIC OUT connector to a balanced audio input (FIG. 9), use all three audio

terminals (+, -, and GND), then connect the "+" terminal to the "live" signal, the "-" terminal to the

"return" signal, and the "GND" terminal to the ground signal.

Modero Table Top Cable (CA2250-50)

The Table Top Touch Panel comes with a standard 10' (3.048 m) Modero cable (CA2250-50) that

supports Ethernet, Audio/Video, and Power connections. The cable comes terminated with two RJ45

connectors (Ethernet and Audio/Video) and a single 2-pin mini-Phoenix connector for power.

Product Specifications

• X = Ground

• L = Live (Hot)

• R = Return (Cold)

FIG. 9

Wiring the rear MIC OUT connector for use with Balanced Audio

FIG. 10 10 Foot Modero Table Top Cable

Modero Table Top Cable Specifications

Dimensions (HWD): • Length: 10 feet (3.048 m)

Connectors: • Ethernet RJ-45 connector (White) routes Ethernet signals between the touch

panel and the NXA-AVB/ETHERNET Breakout Box.

• Audio/Video RJ-45 connector (Black) routes differential audio/video signals

between the touch panel and the box.

• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external

breakout box to the target panel.

Included Accessories: • Modero Table Top Cable (CA2250-50)

Balanced OUT

GND

OUT-

OUT+

Ground signal

Return signal

Line signal

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 219 220

Sin comentarios

AMX AXT-CV10 Especificaciones Pagina 21