AMX MET-ECOM-D Especificaciones descargar pdf (Pagina 59)

Programming

Metreau Entry Communicators

RTP, RTCP Video and Audio Streaming Commands

Metreau Entry Communicators support the following RTP, RTCP Video and Audio Streaming

SEND_COMMANDs on port 1.

Touch Panel Intercom Commands (Cont.)

^VER?

Metreau Entry Communicator

version number.

The Metreau Entry Communicator will respond with its version num-

ber as shown in the response below. The Metreau Entry Communica-

tor will respond with one of the following strings:

Syntax:

SEND_COMMAND <DEV>,"’^VER?’"

Example:

SEND_COMMAND MET1,"’^VER?’"

Returns:

VERSION xx.xxx.xxx

RTP, RTCP Video and Audio Streaming Commands

GET VIDEO

Retrieves the configuration of the

video system.

Information returned includes

codec, resolution, and bit rate.

Codec can be either H-263 or

MJPEG.

Syntax:

SEND_COMMAND <DEV>,"'GET VIDEO'"

Example:

SEND_COMMAND MET1,"'GET VIDEO'"

Returns:

VIDEO = MJPEG

SET VIDEO

Sets the configuration of the video

system.

Configuration includes codec,

resolution, and bit rate.

Note: See the STREAM-SET

command for details on setting up

a H.263 video stream.

Syntax:

SEND_COMMAND <DEV>,"'SET VIDEO <Codec>'"

Variable:

• Codec = OFF, H263 or MJPEG

Example:

SEND_COMMAND MET1,"'SET VIDEO MJPEG'"

Sets the video configuration to a very high quality stream.

Note: Do not change the Audio or Video Codec settings during a call.

GET AUDIO

Gets the current configuration of

the video system.

Configuration includes codec.

Syntax:

SEND_COMMAND <DEV>,"'GET AUDIO'"

Example:

SEND_COMMAND MET1,"'GET AUDIO'"

Returns:

AUDIO = G.711ULAW

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 87 88

Comentarios a estos manuales

Sin comentarios

AMX MET-ECOM-D Especificaciones Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AMX MET-ECOM-D