AMX MET-ECOM-D Especificaciones Pagina 57
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Programming
51
Metreau Entry Communicators
Programming
Overview
There are a select number of SEND_COMMANDs recognized by the Metreau Entry Communicators.
SEND_COMMANDs
Below is a list of SEND_COMMANDs supported by the Metreau Entry Communicators from NetLinx
masters.
To use these commands, establish a Telnet session from the PC to the NetLinx master. Additionally, you
could use NetLinx Studio 2.4 or the master’s web page to send the commands.
Touch Panel Intercom Commands
These commands are used to setup connections between panels that are Intercom-enabled. The "^MOD"
model name command (see page 52) is used to query a panel to determine if it has intercom capability.
All text is based on a Unicode index.
Some (not all) G4 Touch Panels feature hardware to support intercom functionality.
Only Touch Panels that support intercom may be able use intercom with the Metreau
Entry Communicators.
Touch Panel Intercom Commands
STREAM-SET
Sets the parameters for a audio or
H.263 video stream.
The communication parameters
must include: IP address, port
used, stream type, mode and
stream ID.
See the SET VIDEO command for
details on specifying the H.23
codec.
Note: It is not necessary to set up a
video stream for motion JPEG
(MJPEG) video.
Syntax:
SEND_COMMAND <DEV>,"'STREAM-SET <dest addr>, <dest
port>, <source port> <stream type>, <mode>,
<stream id>'"
Variables:
• <stream ID> integers are from 1-20.
• <mode> Starts a call to the specified IP address and ports, where
initial mode is either TALK OR LISTEN. Please note, however, that
no data packets will actually flow until the intercom modify
command below is received.
Example (audio stream):
SEND_COMMAND MET1, "’STREAM-SET
192.168.0.3,9000,9002,audio,TALK,1’"
SEND_COMMAND TP2, "’^ICS-192.168.0.4,9002,9000,2’"
Sets up a hands-free unicast call between Metreau Entry
Communicators and a touch panel.
- Entry Communicators 1
- Table of Contents 3
- Metreau Entry Communicators 5
- Front Components 8
- Rear Components 9
- MET-ECOM-D Specifications 11
- Positioning the Camera 13
- Wiring and Connections 15
- PoE (Power Over Ethernet) 16
- Connecting The Device via I/O 17
- (FIG. 9) 18
- System Diagram 19
- System Diagram - Intercom 19
- Metreau Entry Communicators 20
- Mounting and Installation 21
- Mounting Specifications 22
- Side Views 23
- Top View 23
- Included in the Kit 31
- (complete) 33
- Using Zero Configuration 35
- CMD shell (ipconfig) 36
- Overview 39
- Configuration Page 43
- Device Utilities Page 47
- Creating Display Images 48
- Creating Dynamic Images 50
- Creating a New Dynamic Image 51
- Audio/Video Page 53
- Programming 57
- SEND_COMMANDs on port 1 59
- Face Plate LED Commands 61
- Camera Commands 62
- Camera Commands (Cont.) 63
- LCD Commands 64
- LCD Commands (Cont.) 65
- I/O Commands 66
- System Commands 66
- System Commands (Cont.) 67
- Upgrading Firmware 68
- Send to NetLinx Device dialog 70
- Using the NetLinx Module 71
- FIG. 48 Extend Call Popup 72
- Door Setup 73
- Disabling All Doorbells 73
- Door Chime Setup 74
- FIG. 52 Room Monitored 75
- Answer Call 76
- Someone At The Door Page 77
- Creating Intercom Pages 78
- Door Chime Setup page 79
- Door Setup page 79
- Intercom Demo page 80
- Sample Intercom Page (Cont.) 81
- Setup page 82
- Someone At The Door page 83
- Creating Popup Pages 84
- Intercom Answer Call Popup 85
- More Time popup page 86
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AMX MET-ECOM-D
(8 paginas)Otterbox OTR3-9000S-01-C1OTR_A Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Gerätekoffer Otterbox OTR3-9000S-01-C1OTR_A.
Wir stellen 1 PDF-Handbücher Otterbox OTR3-9000S-01-C1OTR_A zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Comentarios a estos manuales