AMX NetLinx NXB-KNX Manual de instrucciones descargar pdf (Pagina 45)

Cross-Line Communication

NXB-KNX KNX Communications Gateway

3. In the Product Finder dialog:

a. Select AMX from the Manufacturer drop down.

b. Click Find.

c. The NXB-KNX Virtual Device will appear in the search results.

d. Select NXB-KNX and click Insert.

e. Close the Product Finder dialog.

4. The NXB-KNX Virtual Device is indicated in the appropriate line (FIG. 27):

To facilitate cross-line and cross-area communication, all group addresses which do not originate from a device that is

located on the immediate line must be linked with the appropriate communication object on the NXB-KNX Virtual

Device.

For example, FIG. 28 indicates Light G, Light E and Light A (which are all of type 1 Bit) are linked with the NXB-KNX

Virtual Device 1 Bit communication object.

1. Create this linkage for all group addresses which do not originate within the line at which the NXB-KNX is

physically attached.

2. Repeat this process starting with the Adding the Virtual Device to the ETS3 Project for all additional NXB-KNX's

in your installation.

FIG. 27 ETS3 - Topology in Default Project indicating NXB-KNX

FIG. 28 ETS3 - Topology in Default Project indicating NXB-KNX

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Sin comentarios

AMX NetLinx NXB-KNX Manual de instrucciones Pagina 45