AMX AXC-232 RS-232422485 INTERFACE CARD Manual de usuario descargar pdf (Pagina 2)

A lightweight communication protocol analyzer has a Data Logger function to record

data in the SD card for long hours.

This device can be used as a PC-connectable Protocol Analyzer for use in the lab (Remote mode), and also as a PC-less Data Logger for use at

on-site tests to record data for long hours (Logger mode).

Measured data is saved as log files of the specified file size in the HDD of

the PC (Remote mode) or in the SD card of the analyzer (Logger mode).

It automatically records data until reaching the specified number of files,

and then deletes the oldest

file to record the new file. Also,

it can stop measurement on

reaching the specified number

of files. It is useful for

detecting any hindrance in

the line.

Long Hour Recording

Schedule Measurement by Inner RTC

Communication log files can be viewed

in detail on a PC. It offers seamless

operation that handles a single

measurement log file even when all

files are read collectively. The

measured data can be converted into

text or CSV format to use in a word

processor and/or spreadsheet software.

Seamless access to communication log files

Monitor data at any speed by setting the baud rate of any four digits.

The high-precision timer makes it possible to record idle time and time

stamps along with data, and is not related to the performance of the PC.

Measures at Arbitrary Speed.

It incorporates an easy-to-use simulation function that makes it possible

to transmit preset transmission data (16 types of data), or fixed data such

as FOX messages, at the flip of a key while checking reception data.

Easy-to-Operate Simulation Function

A newly developed instant power failure prevention circuit protects important

communication log files stored in the SD cards, by protecting the SD cards

from being corrupted even if power fails while recording data to the SD card.

Protects important data from corruption due to power failure

Small and robust housing suitable for severe field environments

[ Record Control Setting ]

*1: For attaching the optional DIN rail plate. Pitch: 70mm. Depth: 3.5mm (max).

RUN / STOP

Switch

SD Card

Slot

USB

Connector

DC Jack

Two-color

LED

Compact Size, Simple Operation

Two Types of Operations Based on Usage Situation.

Compact Size, Simple Operation

Two Types of Operations Based on Usage Situation.

The device comes standard with RS-232C/RS-422/RS-485 interfaces,

which are used widely in medical equipment and electronic products.

With an optional TTL probe pod (OP-5M), it can monitor TTL-level

communication at 2.5V/ 3.3V/ 5V. LE-200PS can measure Sync

communication, which has transmission/ reception clocks.

Supports RS-232C/RS-422/RS-485 (Standard Feature)

*1: A terminal-supplied power from analyzer. ON/OFF

switchable.

*2: LE-5TB is useful for connecting the signals.

*3: LE-200PS only.

*4: Signal pins not defined here are not connected.

Signal

RS-232C SD

RS-232C RD

RS-232C RS

RS-232C CS

RS-232C DR

GND

RS-232C CD

+5VDC

RS-422 RXDB+

RS-422 RXDA-

RS-422 RXCB+

RS-422 RXCA-

RS-232C ST2

RS-232C RT

RS-422/485 TXDB+/TR+

RS-422/485 TXDA-/TR-

RS-232C ER

RS-232C CI

RS-232C ST1

Pin Assignment of Connector (DSUB 25 pin)

[ Terminal Block Adapter (LE-5TB) ]

[ TTL Monitor Probe Pod (OP-5M) ]

[ Example of Simulation ]

[ Simulation Data Tables ]

[ Text Conversion Setting ]

RS-232C / RS-422 / RS-485

Communication Protocol Analyzer

[ Recording Time ]

*: In the case of full-duplex transmission of 1K byte data at 1ms intervals.

Capacity: 1.8G byte (e.g. 4M byte×450 files)

Approx. 100 Hours

Approx. 4 Hours

Baud Rate

9600bps

230.4Kbps

Communication errors can be detected with high reliability.

It can judge parity error, framing error, BCC error of various block check

codes, and short SDLC/HDLC frame (LE-200PS only). It can find the

communication sequence in the event of an error, by setting an

application-level error notification character string to the character string

agreement criteria of the triggering function. It can notify an error to

external devices and alert a communication error in the logger mode

(with a panel LED lighting), by specifying an external trigger signal

output and user-defined LED lighting as a triggering action.

It is useful in the situations of:

*PC usage is not allowed.

*Dusty places (PC cannot be used).

*Need to record data for more than one month.

*Cannot operate the analyzer well

Logger Mode

(PC less)

There are space limitations.

Record in the SD card

Remote Mode

(PC connected)

Real Time Clock (RTC) backed up by

the battery of the analyzer makes it

possible to specify the starting and

ending times of the measurement. After

the measurement, it turns off the power

automatically and saves on power

consumption.

Developing Device

Analysis PC

Connect to PC

via USB

Record in the HDD of PC

[ Dust-proof Covers ]

[ Data display example ]

[ Data display example (Control line information is displayed.) ]

[ Onto 35mm DIN Rail ]

[ Auto RUN/STOP setting ]

[ Configuration Setting ]

[ Trigger Setting ]

PLC Robot

M3 Screw Holes

Measurement Connector

External Signal

Terminal

The palm-sized robust unit can be used between –10 to

+55̊C. It operates not only on USB bus power, but also on

external DC power of 8 to 26.4V. The consumption current

is as low as 100mA at DC12V input. The SD card slot and

the USB connector are equipped with a dust-proof cover

that allows 2-way operation. It can be fixed easily to the

equipment to be examined or built into an inspection line,

since it is compatible with 35mm DIN rails.

1 2 3 4

Comentarios a estos manuales

Sin comentarios

AMX AXC-232 RS-232422485 INTERFACE CARD Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX AXC-232 RS-232422485 INTERFACE CARD