AMX AXC-232 RS-232422485 INTERFACE CARD Manual de usuario descargar pdf

The photo is for illustrative purposes only.

A PC-connectable communication protocol analyzer, which can also be

used as a stand-alone communication data logger that supports SD cards

•

All brand names and product names mentioned in this catalog are trademarks or registered trademarks of their

respective companies.

•

Specifications and designs of products listed in this catalog are as of February 2012, and

are subject to change without notice for improvement.

•

Colors of actual products may differ slightly from that

listed due to printing condition.

•

This catalog may not be reprinted or duplicated, in part or in whole.

LINEEYE CO., LTD. is a venture company founded by electronic

equipment development members of the former Sekisui Chemical

Co., Ltd. with investment from the Sekisui Venture Fund.

Printed in Japan

L-12202E/LE G

LINEEYE CO., LTD.

Head Office/Sales Office

Marufuku Bldg, 5F, 39-1 Karahashi Nishihiragaki-cho, Minami-ku, Kyoto, 601-8468

PHONE: 81-75-693-0161 FAX:81-75-693-0163

URL http://www.lineeye.com

E-mail

info@lineeye.co.jp

Read the instruction manual provided with the product before use and use the

product as explained in that manual. Using the product in ways not guaranteed in the

manual, connecting it to systems outside of the specified ranges and remodeling can

all cause trouble and damage. LINEEYE CO., LTD. will assume no responsibility

whatsoever for trouble or damage arising because of unauthorized ways of use.

SAFETY

WARNING

00337

00094

LE-200PS

LE-150PS

Communication Protocol Analyzer

Async Communication Supported

Async, PPP

Baud Rate: Max. 500Kbps

LE-150PS

Multi-Protocol Supported

Async, Sync, BSC,

SDLC, HDLC, X.25, PPP

Baud Rate: Max. 1Mbps

LE-200PS

Async Communication Supported

Async, PPP

Baud Rate: Max. 500Kbps

LE-150PS

Multi-Protocol Supported

Async, Sync, BSC,

SDLC, HDLC, X.25, PPP

Baud Rate: Max. 1Mbps

LE-200PS

Speciﬁcations

OPTIONS

SD-2GX

*1: It is available only for measuring RS-232C. *2: 2GB SD card is supported. LINEEYE plans to upgrade it to 8GB SDHC card in the future.

*3: AC adapter is sold separately. In the Remote mode (with PC), it runs by the USB bus power. In the Logger mode (PC-less), you need to

have the optional AC adapter (3A-183WP09) or use the optional Power Plug Cable (SIH-2PG) and external DC power.

2G byte SD Card

3A-183WP09

Wide Input AC Adapter

SIH-2PG

Power Plug Cable

LE-259M1

DSUB 9pin

Monitor Cable

LE-5TB

Terminal Block Adapter

OP-5M

TTL Monitor Probe Pod

LE-DIN13

DIN Rail Mounting

Plate for LE-series.

Model

LE-200PS LE-150PS

Measurement Connecter

Protocol

Baud Rate

SYNC Clock

Data Code

Bit transmission order,Polarity

Error Check

Memory

Recording Type

Mode

Measurement start/stop

Idle Time

Time Stamp

Line Status Measurement

DSUB 25pin female connector (M2.6)

ASYNC, ASYNC-PPP, Character

SYNC: SYNC/BSC, Bit SYNC: HDLC/SDLC/X.25

ASYNC, ASYNC-PPP

50bps~1Mbps (arbitrary) 50bps~500Kbps (arbitrary)

ST1

, ST2

, RT(RXC),

AR(clock extracted from the edge of SD/RD)

ASCII, EBCDIC, JIS7, JIS8, Baudot, Transcode, IPARS, EBCD, EBCDIK, HEX

Order: LSB first/ MSB first (switchable), Polarity: Normal/ Invert (switchable)

Ring Buffer (continuous) mode, Fixed Buffer (full stop) mode

Remote mode (with PC); Data Logger mode (without PC)

Control from PC, Start/Stop switch, Auto-Power run, Specify date and time.

OFF (no-record); Resolution: 100ms, 10ms, 1ms; Max. 999. 9s

OFF (no record); Date time stamp: “Day/Hr/Min”, “Hr/Min/Sec” or “Min/Sec/10ms”

Conversion

Convert data into Text or CSV format and save.

LED

4 of two-color LED: Power/ Error, Test/Record, SD/RD, User defined U1/U2

Switch

One: Run / STOP

External Trigger

Input: 1, Output: 2. 2.54mm pin header connector

2 – 8G byte

2G byte

SD Card

USB 2.0 Port

Mini-B connector High speed supported

1 sec

In operation:-10~+55˚C In storage: -20~+60˚C, 5 - 85%RH (No condensation)

86(W)×130(D)×30(H) mm, approx. 220g

OS: Windows

XP/Vista/7 PC: PC/AT compatible

Power

USB bus power or external DC(DC8 - 26.4V),

AC adapter: “3A-183WP09" (center +)

Power consumption: Max. 1.2W, 0.1W/DC12V when powering off

Work time during Power failure

Ambient Temperature, Humidity

Standard

Dimensions, weight

PC environment

Communication error, data string up to 8 characters (don’t care and bit mask available), idle time more

than the specified duration, time stamp (don’t care available), trigger-matched data.

Record signals (RS(RTS), CS(CTS), ER(DTR), DR(DSR), CD(DCD), CI(RI), EXIN) with

transmission/reception data. Waveform display (RS-232C only)

Communication error, data string up to 8 characters (don’t care and bit mask available), idle time more than

the specified duration, matched timer/counter value, logic status of interface signal line, external signal.

Stop measurement (offset can be set), validate/invalidate trigger condition, control timer/counter, send

specified data string, send external signal, turn on/ off the light of user-defined LED

Address Filter

Trigger

Action

Condition

Protocol translation display on PC

Transmit data registered in 16 data tables (16K byte) with one press of a key.

DTE/DCE mode selectable. Pre-set the timing of line/data. Insert parity error.

Record only frames of the specified address.

(HDLC/SDLC/X.25 only)

SDLC (modulo8/128),

ITU-T X. 25(modulo8/128), LAPD, PPP

PPP

Parity (ODD, EVEN, MARK, SPACE), Framing, Break, Abort (LE-200PS only), Short frame (LE-200PS only), BCC (LRC,

CRC-6, CRC-12, CRC-16, CRC-ITU-T, FCS-16 (LE-200PS only) ), FCS-32 (LE-200PS only). BCC permeation mode

PC: Max. 8G byte on the HDD; PC-less: Capacity of the SD card

(specify the file size at 128K / 1M /2M / 4M / 8M byte)

Interface Standard: RS-232C /RS-422 /RS-485 Optional: TTL (Model: “OP-5M”)

Input: AC100∼240V, 50/60Hz

Output: DC9V, 2A

Plug: Center+, Outside diameter:

5.5mm, Inside diameter: 2.1mm

DC Plug (Outside diameter:

5.5mm, Inside diameter:

2.1mm)<

–

>Y terminal: 1.8m

Supply external DC power to

the DC jack of the analyzer.

Cable clamp is included.

Branch cable for monitoring

RS-232C over general

DSUB 9pin, such as with the

PC.

An adapter to extract the

RS-422/485 signals on the

DSBU 25pin connector to the

terminal block.

* Sync clock signal

measured by LE-200PS

cannot be captured.

2G byte SD card.

*Same as the card packed with

LE-200PS/LE-150PS.

A probe pod for monitoring

TTL-Level communication

lines at 2.5V/3.3V/5V,

* Cannot be used for

simulation function.

To mount the LE-150PS /

LE-200PS on the 35mm DIN

rail.

RS-232C / RS-422 / RS-485

PC-connectable Protocol Analyzer…x 1

DSUB 25pin monitor cable (LE-25M1)…x 1

Mini USB cable (SI-US218)…x 1

External signal I/O cable (LE-4TG)…x 1

2G byte SD card (SD-2GX)…x 1

PC software CD…x 1

Instruction Manual…x 1

Warranty…x 1

Standard Set

Simulation

Retrieval function on PC

CE(class A), EMC(EN61326-1:2006)

1 2 3 4

Indice de contenidos

Pagina 1 - LE-150PS

*The photo is for illustrative purposes only.®A PC-connectable communication protocol analyzer, which can also be used as a stand-alone communication

Pagina 2 - RS-232C / RS-422 / RS-485

A lightweight communication protocol analyzer has a Data Logger function to record data in the SD card for long hours.This device can be used as a PC-

Pagina 3

A lightweight communication protocol analyzer has a Data Logger function to record data in the SD card for long hours.This device can be used as a PC-

Pagina 4

*The photo is for illustrative purposes only.®A PC-connectable communication protocol analyzer, which can also be used as a stand-alone communication