AMX Rack Rail Kit MMS Servers Guía de instalación descargar pdf (Pagina 8)

- 8 -

FAULT

RED

On

One of the following situations exists:

• The signal contact is open.

• ABC Loading/Saving Failure.

• The port has been disabled because

the ingress multicast and broadcast

packets exceed the ingress rate limit.

• Incorrect loop connection in a single

switch.

• Invalid Ring port connection.

Off

The system is operating normally.

PWR1

AMBER

On

Power is being supplied to the main

module’s power input PWR1.

Off

Power is not being supplied to the main

module’s power input PWR1.

PWR2 AMBER On Power is being supplied to the main

module’s power input PWR2.

Off

Power is not being supplied to the main

module’s power input PWR2.

MSTR/

HEAD

GREEN

On

One of the following situations exists:

•

The switch is set as the Master of the

Turbo Ring, or as the Head of the

Turbo Chain.

• POST H.W. Fail (+Stat on and Fault

blinking).

Blinking

One of the following situations exists:

• The switch has become the Ring

Master of the Turbo Ring.

• The switch has become the Head of

the Turbo Chain after the Turbo Ring

or the Turbo Chain went down.

• The switch is set as

a member of the

Turbo Chain and the corresponding

chain port is down.

Off

One of the following situations exists:

• The switch is not the Master of this

Turbo Ring.

• This switch is set as a member of the

Turbo Chain.

CPLR/

TAIL

GREEN On One of the following situations exists:

• The switch’s coupling function is

enabled to form a back-up path.

• The switch is set as the Tail of the

Turbo Chain.

• POST S.W. Fail (+Stat on and Fault

blinking)

Blinking

One of the following situations exists:

• Turbo Chain is down.

• The switch is a member of the Turbo

Chain and the corresponding chain

port is down.

Off

One of the following situations exists:

•

This switch has disabled the coupling

function.

• This switch is a member of the

Turbo Chain.

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios